Search results

Just wondering if the Oracal 651G ok for outdoor printing,, or is it mostly used as a cut vinyl.. I am trying for find a good white gloss outdoor vinyl suitable for vehicle decal printing.. or is there any recommendation of which vinyl would be more suitable??..

Contour cutting is not quite over the image after cutting,, it is slightly over to the right,, by not much, just enough to give wider margin to the right and none at the left side of the image. I recently installed a new main board at which time I reset all the parameters and installed the...

Was wondering which vinyl would take eco-solvent ink the best,,, I am leaning toward Oracal Calendered vinyl, mostly to do vehicle graphics and large decals, the matte vinyl would be used for indoor purposes..

Cj-500 gives me the error message "Lost Pinch Roller" after pushing the setup key. I checked all three pinch roller positions and they are right on the money.. one way left, one in the middle and the other over to the right.. Naturally it wont let me to do anything after that comes up..I...

I am installing a new mainboard and was told that I have to start out with the original firmware 1.50,,, then I can upgrade to 4.40 If anyone still have this older firmware I would appreciate a copy..thanks,

Has anyone here installed a main board on either one of these printers Roland Cj-500 or Sc-500. I printed out the System and Service Report, is it important to install the Service report part as well? I understand the latest version of the firmware 4.40 has to be installed as well. The nearest...

I have installed a bulk ink feed system on my epson WF 1100 lately I got on doing some printing and in the epson print dialog box it shown that the yellow ink was low, and to replace the ink cartridge, but the bulk system is still half full. I assumed once the bulk system was installed I...

print head not firing of cj-500,, when doing a head clean it puts ink into waste bottle ok, goes through the motion of trying do a print test, but does not lay any ink down,, got new head cables, new dampers and capping station. Ink heads have nice spay pattern when I push solvent cleaner...

Has anyone installed a new main board on a Roland Cj-500? Like to know how difficult of a job that is? I bought a new main board and was told I have to extract all the info I have on the old board and transferred it over to the new board. I can't find any documentation of how that could be...

I got a new main board replacement for my Roland Cj-500, the old board is still in the printer and still have access to service mode. What I like to know is how to go about installing the new board,,, what are the steps I need to know about before and after installing the board..

I want to replace the encoder sensor boar on the Cj-500 it seems to be a hard to find item. I am wondering if it could be interchanged with other Roland model printers encoder sensor..

I need to replace my shorted out mainboard in my Cj-500 and need help doing it. I have downloaded the firmware for Roland and got the new Mainboard as well. I was told that I have to extract the settings off my old board to transfer to the new main board.. not sure how to go about that...

Looking for a Roland tech in the Phoenix area..

I recently acquired an used Epson 1280 in a yard sale, however when I plug in the power the green light just blinks. I like to know if anyone can tell me if this problem fixable,,, and how would I go about it..??

I cant find any reference in my Cj-500 users or service manual as of which direction should the head cable be plugged into the print head,, facing out or facing to the back. It's been a long time since I removed the cable and now I am a bit confused about it.. I would appreciate if someone set...

Had my Cj-500 setting for while I was waiting for my new main board to arrive, meanwhile I cleaned the carriage and was ready to install new head cables which I removed do to shorting out...question is,, does the cable get installed with the printed side facing out at both the carriage board and...

I have just a cpl of questions to install my new main board... Where can I go to download the Firmware upgrade for this board? Also do I install the Firmware first than set the parameters?

I need a cpl. of inductors for my Roland Cj-500 main board,, I have not idea where to buy them or even what to look for since there are not much markings on it,, other then 181 on top and 125°c mark on the side. One located on L1 the other on L2 board markings. Enclosed is a picture of it.. if...

I found this website called biztrumpet.com selling Roland Cj-500 main board the actual seller is PT.KLIKID.com.. Like to know if anyone from here ever done business with them.. their main board price for the Cj-500 is $1170.00 seems like a good price but can the site be trusted?

I am shopping for a Main Board for my Cj-500 and I found a site online from Indonesia, oridigital.com wondering if it's a safe place to purchase from,, they don't seems to take credit cards. I so far had good luck buying from china, but from Indonesia I don't know...