Search results

Guys, I am in need of a cpl. of capacitors to replace on my mainboard, the numbers on the top of the capacitors are 181. I don't have a clue where to get them.. any help would be welcome!

I need some repair parts to get my Cj-500 going again.. I want to start with lower cost items than work my way up until I get it working again. Right now the printer will power up and that's about it, as soon as I hit the sub-power key it gives me a warning " Temperature is too low ". I...

I want to thank all the people who tried helping me with my Cj-500 problem! Just managed to purchase a Main board cause I am not sure that my main board is functioning right, the board I bought was embarrassingly cheap. I am sure I'll be back for help once I start entering in the parameters,

Does anyone know where I can get replacement parts for my cj-500 which includes.. Trailing head cable, Power supply board, Encoder strip and maybe a new or used main board. Digiprint supplies got some of these but they out of my price range...

Looking for a reasonably priced power board for my Cj500.. I am replacing a lot of stuff on my printer to get it running again...

Does anyone know where to get one of these sensors? it seems all I come across is for newer printers. Are these sensors interchangeable, as long as they have the same amount of wires and the mounting holes correct?? just don't know much about it...

Got issues with Cj-500 such as a message Temperature is too low,, somehow I manage to try to do test print but not laying down ink, also now it gives me Encoder error and ask to shut down the printer. Also noticed as soon as I push the setup key the main board LED light will come on but the LED...

After reinstalling main board back from repair, due to shorting cause by head cable. I also installed new head Carriage Board and new head cable, reinstalled print heads with new dampers, now I am getting the message Temperature too low in dialog window. I am not sure how to correct this...

Printer error,, Low Temperature,, is this caused by damaged head or there is a temperature sensor located elsewhere other than on the print head? ambient tempt is at 78 Fahrenheit currently in the room. I have not tried replacing the heads yes, thought there might be a sensor on the main...

I looked at some channel letter banding machines for aluminum and stainless steel, found one for 9K but it's from China. Anything close to it in the States sells for 20K and up. Does anyone of you have one of these machines?

Does anyone knows where I can purchase a main board for my Cj-500.. I sent the board for repair to MacMedia 4 weeks ago and still have not got my board back, nor do they reply on the status of the board. I am about to start legal action against them, so it looks like I need to buy a board for...

I really like to know of what is the major difference between the cj-540 and the 500 printer cutter. I have a cj-500 but also I do have a chance of getting a cj-540 at a good price, it does need some minor work print heads and so on.. after fixing it up I may sell my 500..I assume the 540 maybe...

Does anyone knows if Cj-500 main board would work ok in the Cj-70 printer,, since they both cut and print and both 54" printers.. My Cj-70 main board got fried and it's the only printer I use for aqueous printing and have to get a bunch of posters out..thought I could swop out the board till I...

Looking for a used but good condition channel letter bending machine for aluminum letters...

Looking for a used but good condition channel letter bending machine for aluminum letters...

I have earlier posted my problem of the printer not powering up..some of you were nice enough to reply including Arbot, who was very helpful and gave me the email address of mac media to have the main board repaired. I figure the shipping back and forth plus repair time may take close to 2...

In the proses of installing a print head I somehow caused a short by the flat cable came in contact with metal while dangling while I changed the print head... I always turn the printer off prior of working on it, this time I got distracted and now the printer wont even power up. In the process...

I may have screwed up this time! Was changing the print head without having the power off print cable may have touched something I started to smell something faintly like electrical burning, now the printer wont power up.. Pleasssssse....Can anyone help me in the room?

Cant seems print red on the Fj-52 conversion printer, it prints orange instead! I replaced all the dampers, print heads, capping station even installed a new pump. I recently converted to eco solvent inks and printed just fine If I print in demo mode it comes out orange, sometimes pink, however...

How would one go about making profiles in Flexi 7.6 I know you do it in the Production Mgr... can anyone give me a clue how to go about it.. I am using Flexi 7.6 with a Roland SC-500 Thanks a bunch!