Search results

I have an Hp 450c potter. I have a draft medium and fine print setting on the unit, however if I set it up to print fast (draft) it will still print in fine. After I print 4 or more sheets it will go into the draft mode, It will print a few sheets that way than it will go back to normal...

I need some input.. I have an Fj-52 converted to eco solvent printer..I can't seems to get the red to print right...it looks more pink then red. I am using FlexiSignPro. 7.6 I am using RedGiant a third party ink,,,, cleaned the heads, capping lines, drain tubes,, so what next? Thanks,

Getting excessive ink splatters around the capping station each time I do a head cleaning.. I see splatter all over the place. I adjusted the print head and that did not fixed the problem. Could it be a bad capping station?

Can anyone tell me where or how to dispose my waste ink I been collecting in gallons of jugs?

My CJ-500 stops printing the color magenta during printing proses. I installed a new damper, capping station, it seems the print head still have some life left in it by not showing too much issue in the print test...See attached pictures it was printed just on poster paper an 360 res...at a...

I want to purchase some pre made graphic designs to print on One Way vision vinyl film, it gotta be high res. I am sure it's out there just don't know where to look. Maybe some one here can point me to the right direction...

Hey guys, I am using FlexiSign-Pro 7.5 to do print and cut on my Roland Cj-500 and getting bad print results when printing text. The edges a bit jagged, I usually create my work in Photoshop and they looks fine until I tried to print them from Flexi...I sure could use some ideas of what to do...

CJ 500 starts out printing fine but after a very short while it shuts off..saying Illegal Shutdown, it never had done this before...can anyone help please!!

My Cj 500 stops printing in the middle of printing process....It says Illegal Shutdown.. any ideas of what to do ??

Can anyone tell me where do I go to clear preferences in Flexi 7.6 I just got the program, still new to these. I read it's a good idea to clear preferences tie to time. I am having some printing problem, not sure if it's Flexi or my CJ-500 it stops during printing and just shuts down...

I tried to figure out why my Cj 500 converted printer shuts off in the middle of a printing process, but with my limited understanding of this printer I can't seems to figure out how to fix the problem. About less then a minute into printing the sub power goes off and on the panel window says...

I am not getting smooth clean text printing in FlexiSign Pro, even at 600dpi.. What settings in Flexi should I be using to get good sharp text printing? Also the other day I needed to print a vinyl sign with black text over light green background, sometime before the print was finished out of...

I converted my second printer a Cj-500 to solvent ink. Was wondering if I should up date the firmware to an SC-500 or leave it the way it is?

I posted inquiry about the wrong printer...my SC-500 is fine, but my Fj-52 conversion printer is what I am having problems with. I uploaded some pictures of print test and one is the demo print. When I converted this printer I flushed all the lines from the water based inks, installed new...

I am attempting to do a head wash which I have never done yet. I am not getting enough Magenta unto the printing..all others firing ok.. I seems I have to do like 15 head cleaning to get something looking half way right... Thanks for your help!

Need some help to figure this out.. When I do the test print (demo Print) it prints out the Hi-Fi-Jet logo and on the red color it prints half of it green and the last half is red. Could it be plugged nozzle not firing right? I did change all the dampers and the capping station and cleared all...

I have a little printing problem! I am using eco solvent ink from ColorBest, it seems that the black ink curls up a bit and when dries it has almost a leather look to it. Also i can see tinny but very faint lines in the printing only seeing it from very close. I am still trying to get the hang...

Can't seems to install the Cj-500 driver on windows 7 home premium version. Do I need to upgrade to the professional version in which allows me to run the windows XP simulation mode to install 32bit drivers, or there is some other way of doing it? Thanks,

I need to print half dozen indoor vinyl banners, has to have un-finish edges and preferably 10oz or less. Any ideas where would be a good place to get some blank rolls. The banner signs will only be 2'x4' but willing to buy 20-30 yards of the stuff.

A client wants some father banners...I have never printed any yet....one of my question is.. is it printable on both side, without bleeding through to the other side? And I imagine it's sewn after printing?