Search results

hows that gun coming along... wanna see what you came up with ;)

Good Luck - i think you made the right choice... I wouldn't want to be across the street from a client all day every day... opens up your @$$ to them being all up in it all day.

cutting acrylic for us = 4-5 drill bits start small, work your way up. usually 1 small, 1 medium, 2 larges with small differenences. I'll get to the last bit, and this may sound crazy... but run it backwards for a bit and it'll clear the burs you get from bigger bits. i usually let the...

juuuust noticed...

ws display for us - have one for our shop that handled 2 tropical storms and multiple days of 50+ mph winds with no issues whatsoever. will turn black from car exhaust before it breaks imo - dark colors work better on the fabric used.

+1 for job -1000 for dubstep

Hired model or friend/family/employee? Any which way - make printers sexy +1

Used to live in the Dub-V... we had some big ones there. I didn't have anything against them until I moved up there. Picked up hunting to help with the overpopulation problem. Shooting deer with an Bushmaster AR-15 20" heavy barrel is a lot of fun. 62 grain bullet @ 2600 fps will drop just...

spellt "floor" rong.

I'm just imagining the guy's kids on a hamster-wheel generator and him yelling "FASTER FASTER, IT'S RENDERING".

are you doing it in 30 degree temps? Is it a new roll of vinyl, or old? Pressure sensitive adhesive requires pressure to activate, are you pushing down the vinyl and tape with a squeegee evenly, and with a good amount of pressure?

That /\ .

SO lemme get this right... 4'x8' is bad when braced on both sides, but 8'x4' is fine when braced only at the bottom? Same surface area. More wood to buy + deeper hole your way. BTW - iirc, you don't actually install signs, was that correct?

So we purchased some RBS's relatively recently, and have had a problem with 2 of them. It seemed that the adhesive strip on the top bar was not strong enough to support the weight of the banner, and the banner was pulling away from the adhesive strip despite being "locked in" via a metal clamp...

#1 Method for dealing with Telemarketers, ever. Watch, you won't be disappointed. http://www.youtube.com/watch?v=mkdoogjic4I

In our experience, we usually go 32.75... sometimes, the mounts at the top don't accomodate 33" even well.

i know it's off season for the lawncare industry, but there must be some leaves you can go scoop up. Good Luck!

Let's replace a few words. "I'm not saying that you enjoy using your advanced age as a means to imply that you are smarter and better than everyone in the world younger than you, that is all too common these days from many old heads that are being left behind by new technology, but you might...

SO lets review: Our situation was resolved because the other company recognized that the quality of work that THEY provided was crap, and yet, we are apparently "audacious, crybaby punks with a juvenile sense of entitlement." Riiiiiiiiight. You have no idea what you are talking aboot...

Couple things you might not know, or chose to ignore: The company we contacted's primary job is vectorization. They are a specialized industry, and as a specialized industry, you would expect that a finished product from them would reflect that status. If you spend all of your time doing one...