• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. HELP! I have ink everywhere!

    yes. with the heads resting on the capping stations disconnect one of the capping station lines from the pump (two lines going into a Y connector before the pump) use a syringe with out the needle and put the capping station line on the end of the syringe and gently pull the stringer back it...
  2. HELP! I have ink everywhere!

    usually when the ink puddles on the floor your pump has gone to hell.... there is a new updated pump to prevent this, this was a common problem with some of the earlier 300's and 540's, the only other thing it could be is a plugged line to the pump or the drain line from the pump, this will also...
  3. sp540 capping station

    O O O O I know, it could be one of two things if your pump is ok which I believe it to be since there is no problem with the black and the blue, it will be the tubes from the capping station to the pump may be plugged, if it isn't that tube check the tube to the drain tank, that just happened...
  4. Involved Computer Question ? ? ?

    wouldn't it be easier to have him/her install the OS on their computer than have them ship the computer to you? I think it would be better to ship the software than the computer, //chopper
  5. Hello, from Texas! Need Help Please!

    Hi, and welcome to the board, your best bet would be to start with flexi them selves they have a web site www.saintl.biz did you get a operators manual with the software? that would be a great place to start also kind slow reading but it will get you going I didn't check out the web site to much...
  6. What kind of grease on Carriage bearings?

    I would go with the 3-1 also but I am no expert with your printer //chopper
  7. What kind of grease on Carriage bearings?

    on what machine? //chopper
  8. roland sp300 error messages

    to unlock service mode it is down arrow right arrow up arrow and then press right arrow,down arrow, and left arrow at the same time. //chopper
  9. SAI is GREEDY

    I feel for ya, once I found the key I sold it wasn't hard to do after getting treated like crap, I like signlab much better than flexi //chopper
  10. SAI is GREEDY

    sorry the key checking in thing I have never heard of, I had a copy of flexi and had lost the key went rounds with flexi and no dice, I was fortunate enough to find the key.. //chopper
  11. SAI is GREEDY

    you cannot deactivate the keys they are a physical key, that is why they will not give you a new one, if they do there will be the previous copies out there still working and they didn't receive payment for.. //chopper
  12. Printing like Summa

    so it is like a printed on laminate? //chopper
  13. Printing like Summa

    I know that Fred is a Gerber user, and I have had friends that have a summa, I had a summa in the past, I just want you to know that summa, recommends that you laminate your prints as well, I do not know if Gerber also requires it but the rule of thumb is if the print is going to be exposed to...
  14. Crop marks

    does it look for the crop marks? or does it look and not find them? if it looks for them but does not find them you need to have the media loaded properly, the dots need to be close enough to the cutting strip where the head scans for the crop marks I have had my machine look for the crop marks...
  15. Roland SP300 print question

    why not laminate ? //chopper
  16. will I use this fancy hold-down hardware kit?

    As Pro signs and graphics stated, I think it would be a waste of money, I think that as the odd jobs come up you will devise a clamping method that works for each job and then put them in the drawer for later use once you have made them, bought them etc... I have not come across a job that could...
  17. Which machine?

    I have a roland print and cut, but I also have a summa cutter with opos for contour cutting that way I can be cutting vinyl, printing and cutting, at the same time, also if I need to print several things I can print on the roland laminate and cut in the summa, or any combination of the above, I...
  18. versacamm seems like its printing crop marks...but nothing is there.

    I would also check the color of the marks to make sure that they are printing in black, not white.. //chopper
  19. chopper

    Adam, I don't want to post this so others can see.... because I don't like sharing some info...

    Adam, I don't want to post this so others can see.... because I don't like sharing some info with the whole world if you get my meaning, the roal sovergin(sp?) is probably the best of the ones you listed, but if I were you I would look on ebay there are a few listed there now, there is a real...
  20. Best way to clone a Hard Drive

    I have use what is called bart pe,ghost I think this is the same as mentioned above, I use it to back up my drives so if there is a failure it is stored on several different drives and I can replace the affected drive and install the sofware with bart pe ghost, //chopper
Top