Search results

I need about 150 metal plates (4.5" x 10") with screen printed text and solid color logos (one color, black). At first I was thinking laser engraved, but with the text being black and everything else bare metal maybe screen printed would be a better solution? Is this something that is possible...

Hello, We have recently run into some issues trying to attach letters in cold rainy weather. Is there a way to get the letters up without waiting weeks for good weather? Right now we are attaching 1/4" acrylic lettering to a wall. Stud mounting isn't an option, as we can't drill into the...

I am constructing some hinged displays, and am doing so on a budget (my customers, not mine). The design is basically an "L" shape made from some hinged foam or gator. I need to brace the angle in a way that can be easily setup or taken down. I have attached a drawing of something I have seen...

Hello, I have a project that I am trying to jam into the first week of the year and it requires some Rowmark ADA w/Raster type braille. The company that I typically get quotes from is out 4 weeks or more. Is there a place that can do these in 2-3 weeks or less? Is there many places out there...

Does anyone know the vendor on this specific ADA Signage? I need to add in some signs, but do not know where they were originally obtained. It looks like it was a sandwich of clear and white acrylic, and the white was routered away except for the letters. Don't know how the braille was done...

We recently upgraded to Onyx 11, and after one week of battling a hardware key issue we were finally able to install. Out of the first three prints, two were bad. In Onyx 10 we would wind up with a few transparency issues (Pantone gradient or transparency, forget about it!). Sometime logos...

We have about 20 smaller sign panels that need a good gloss paint, suitable for outdoor use. They will be .25" acrylic, and need to last outdoors for some time. Typically we use automotive primer/paint on our metal signs of same size, but acrylic is required here. Will the same paint combo work?

I have a client looking to move his current sign to his new location 2.6 miles down the road. The current pylon sign is about 16 feet tall, and has construction similar to the photo attached (but smaller). We would be subbing the majority of the job out, but before I get too deep into this, is...

We do numerous signs that go in public areas that have the rules of the site listed. Most are two color cut vinyl on DiBond. We clear coat them to protect from vandals and general weathering of the signs. I recently got some feedback that the DiBond isn't cutting it in some locations, and is...

Does anybody know if there is a good wholesale vendor for the attached weighted sign bases? Been looking for a while but can only find this place. Doesn't have to be exact, but same style of mount.

What the Font was no help on this one. Seems easy enough. Can anybody help? Thanks! Ryan

Hello, I have a client who is looking to update his post and panel sign. It was done years ago, and had been refaced last year but now it is time for a full revamp. Currently it is 2 sheets of 4' x 8' Alumalite w/pressure treated 4" x 4" posts, and he has mentioned that he may want to switch it...

Hello, We have utilized VClipz from panelclip.com to install quite a few gatorboard mounted signs. usually two clips on the poster and two on the wall work just fine. We have a larger sign in our shop that keeps falling down. We have used two clips on either side, with VHB tape, and it just...

Hello, We are getting ready to do a number of installations for a new business opening up. Most involve vinyl lettering on various walls and substrates attached to the walls. One involves some very large block lettering to be installed to a finished, smooth concrete wall (see picture). My...

I can' t seem to get this one perfect. Any help?

I need about 800 items printed on a flatbed directly to .030" styrene and cut along a cut line. Design is a simple l shape with some rounded corners, about 18" x 15". Can anyone print and cut these for me? Thanks in advance, can supply artwork upon request.

I have a client wanting us to replicate the look of a current a-board they have. I can get the handle and the substrate, but these add on feet are something Ive never seen. They look like 1" dowels (made of plastic) with part of it cut out for the substrate, and it allows you to bolt them to the...

Hello, I am looking at an order of 300 fabric banners w/grommets I need to fill. I don't know that our usual vendor is up to the task in both the pricing and quality categories. Any reccomendations on a good vendor for some fabric banners? 300 4' x 6' 6 Grommets

I have a client asking to mount a 3' x 2' sign to a 4" x 4" post and put it in the ground. They have now asked that there be no visible hardware on the sign face, how would one do that? I was thinking maybe mount the sign with some countersunk screws and put the print over that, but it seems a...

I have a client who is looking for some door vinyl. There text is very fine (think Zapfino, etc.). We were working with 3M colors until another partner entered the project and decided that the color wasn't close enough. They now want to print, laminate and cut for a Pantone match. I haven't ever...