Search results

I had a similar thing on the 7151. Turned out that the coolant lines inside the heatsink were full of dust that settled and restricted the flow. I had to disconnect the coolant lines and manually flush out the lines with a syringe. This also helped me work out exactly where the blockage was as...

jeezus. looks like I'll clearly stick to what I can find on google. Just wanted to add a little colour to my office.

I can adjust the scan or feed parameters by doing alignment tests, but can I do something similar to the media feed adjustment on a roll to roll on the ujf? I.E. I'm getting a little banding when printing solid colours (ultramarine blue), and I want to smooth it out. If I was using the jv33, I...

I would like to print off some posters for our office over here. Does anyine have any good sites they can recommend? Anything I can find online is of mediochre quality and not really clear.

Cheers. As it turns out, the previous owner always had it set up with a jig and adjusted the values manually. Thanks a ton. You've helped me out when mimaki don't want to touch me

So realistically, the value should be 148.5?

These are the current images after going ton#adjust menu...

thanks. The "Slider", is this a physical attachment thing I need? or is it already the aluminium casting that is attched to the head?

I'm now trying to adjust the head gap to get rid of the overspray/mist I am producing when printing braille. setting the media (18mm thick) and head gap is 1.5mm, table is 135mm. I use my shim that is 1.6mm aluminium to check the head gap. It slides in there with no obstruction and I can clearly...

So as it turns out, it had nothing to do with the sensors etc. I noticed that the coolant was not circulating throughout the machine. And at first I thought it was the pump. I replaced the pump but still nothing. The reservoir tank had a bit of debris in it, so I cleaned it out and flushed the...

Can anyone tell me what this is and what should be in it? Bottles at the back of the machine.

ok, heres one for the brains trust. I have 2 jv33's. I have carts that are OEM and 3rd party. 3rd Party has permanent chips. on one particular JV33, the cyan channels (and others) will not register with either cyan OEM or 3P. But.... if I swap out a cart that does register (in this case...

When I am printing braille, I'm getting a little ghosting when I'm printing multiple layers on the print side of the character. Is this a levelling issue? I briefly remember a mimaki rep commenting on something like this way back, but I'm unsure. Then... How can I adjust this?

Thanks. I have all the manuals and had no idea in which one it was.

Is anyone running 6 or 8 colour CMYKLcLm configuration on their JV33? I've converted mine from dual 4 colpour to 8 lines, but I'm not sure of the cartridge config left to right. Any help?

Is this an "easy fix"? E.G, something a standard maintinence plus a couple of consumables be the answer?

How often is the "Ink Overflow" error acceptable? It seems that after I put my machine to sleep for a day or two and then turn it back on, the error pops up and I need to correct one of the white ink channels. it's the same channel all the time and it's eaten quite alot of the white ink from...

gaffa tape the new one on to the old one and pull it through

swap the dampers around. That will tell you if the ink flow is the problem or if it's a capping or head issue

I had the needle that goes into the ink cart get all gummed up and the valve wouldnt open/close properly. Sounds like you have a supply issue. Try swapping the dampers around in the different channels. This will confirm tht the head is good, also the dampers and captop. Prime the dampers with...