Search results

They wont buy the license for xrite so I can do the profiles. Plus they already had repeat jobs with those settings. for years before Iwas here.

I can but we record all settings and we have repeat customers. Im trying to keep it all consistant. and it use to work at 200% density why would I change now? thanks for the response

correction 6 color

sericol 4 color x2 printing too light. I can tell by the jetout.

My black looks a little weak. I need a stronger black print. I changed the filter besides art what else could it be? Jeti 3150x2 flatbed printer. Thanks in advance CWB

Quarky machine I rebooted it and now it works. got to love that.

help Well I thought I figured it out. They warm up now and stay on untill half way through the print. Anyone know what this could be?

Nevermind I figured it out.

I have new uv lamps and when I put them in they warm up and shut off. The old lamps work just fine but they're life limit is expired and i'd like to replace them with the new ones. I have two sets of lamps they do the same thing. Anyone have any ideas what Im doing wrong? Like I said I put the...

Turns out it was a bus fuse in the back above the ink tanks. LOL

Ok thanks for you help! 1300 did not work it was rough on stops when the carriage has to come back. so I'll call the Tech.

Ok I'll give it a try. Now if it dosnt work where can flash the motion board?

Today my Jeti hasnt been able to print. We had a electrical storm over the weekend out some of our power was out. However the printer started up and the print carriage will make the first run down the table and just die almost at the end of the strip and coast the rest of the way into the metal...

Digital Canavas ?s If it were me I'd call this guy. Phillip Kidd, Southern US phillip.kidd@sihlusa.com (757) 966-7180 x 806 He reallly knows the Sihl products as well as the production side of it. Also if your not already I'd look into making your own profiles with Xrite Eye One...

Has anyone running a Gandi seen this problem before?(see pic) A session error of some sorts. Rebooted the machine and this message popped up. We're Running a Gandi 3150 5'x10' flatbed printer. using Fedora O.S. and Gandisoftware. Have had issues with full HDD before but not like this.

thanks Rick and Rycck! Actually it was ink in the low vac lines. Had to flush them out several times. Back up and running again. Thanks so much for you time. Don't know much about Jersey but it can't be bad. Lesson Learned leave machine on while changing heads only I/O board gets turned off.

Rick McDonough, Yes it started right after I put 4 new heads in. Yes the pumps click non stop allowing ink to keep pumping thru heads. 48 heads and 12 ink tanks 1 solvent tank. So 1 tank for every 2 heads. Sometimes ink drops on one half sometimes its all of them. and yes ink did get in the low...

Yeah its gotta be air leak. Problem is I only got a hundred hoses to check and 60 O rings. thanks RycckG Do you have experience with Gandi 3150?

That makes alot of sense. I replaced some heads and soon after that is when it started. Either i didn't do something right or I had a problem already waiting to happen. but I 'll give that a try it sounds like a good way to isolate a leak. Thanks alot.

Does anyone know a fix for ink dropping from the heads. I think its a low vac. problem or air pocket in lines but i can't seem to stop the ink from dripping. Very hard to print this way LOL. Any Ideas? I appreciate it. Printer: Gandi 3150 X2 5x10 flatbed Cwb