Search results

Throw it in the scrap bin. Not my money, I just work here.

Yup, the roof panel will look worse way before the vinyl or paint ever will.

Some sort of black marine adhesive like bostik 940 applied to the inside so you don't see the back of it?

Is it supposed to simulate muntins? Get a 4x8 sheet of black 040 aluminum, shear the strips and adhere them to the glass somehow. That's all they are on regular single pane aluminum windows.

Ya gotta help it til the first wrap. I stand behind the laminator, run it real slow, get the one wrap on the backer, tape the print to the take-up then crank it up.

Mine cuts about as random as my old sp300. It also gives an error when using barcodes on anything more than a few feet long but the same file fine if you use cropmarks. I'm using CM4.

I roll over masking tape and put it on each end and the center, same concept. I keep my backer lower where there's only about 3" of laminate exposed.

Cincinnati. That's my wife crowing.

Possibly, I pull off or swap backer rolls for every new run and also don't leave it webbed. Try it and see

I'd switch over to SS21.

Laminators are really forgiving if you pay attention. It's not rigid material. There's slop in the roll holders, you can grab sides of them and put a little pressure to get it to track back straight. You can grab the centers of rolls to work out wrinkles. It just takes a little thought and...

Depends on how sloppy I was loading it but usually not. Might want to add a bit more tension, mine's a china brand and the tension setup on it never seems to stay adjusted right. I do keep my hand on the right side of the backer take up reel and try to keep it about at the front-center of the...

Would probably need two people to step on it but price is pretty decent...

We cut 6mm with a hydraulic shear, stomp should do the same. Coro I dunno, the hold down will probably crush it

I think there are a lot more freelancers now trying to jamb out as much crap as they can hoping that something they write sticks somewhere. Or they're first to report

I never really found 3M to be slideable, it's more on the aggressive side IMO.

Look into color corrected lighting and bulbs with a CRI over 90.

You type in texassignmaker for the this one?

You already do that.