• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. CG-130FX problem

    I cleaned the laser/sensors. Reset the machine from set up menu and re entered the values. That's pretty much.
  2. CG-130FX problem

    Hello everyone, When I place my media to CG-130FX to contour cut, as usual first it checks placements of the 3 wheels and returns to home position. But now, almost immediately looks for a detection mark and it fails with error 36. This is exactly what is wrong. It just started doing this. Any...
  3. CJV30 Dryer exhuast unit

    In my opinion you do not need to have the Exhaust with ES3 inks. I am using Triangle Solvent ink on my JV33 and I do not turn it on the exhaust. However I feel necessary to mention that my JV33 is installed in a 20'x20' room may be little bigger.
  4. 7.5 mil Clear Cling

    Hello everyone, Can you guys give me any tips printing on clear cling with JV33 and perhaps cutting? Thanks in advance
  5. JV33 vs CJV30

    If I was in your shoes I would go with CJV30 solvent ink CMYKx2. I don't think you can get another plotter for $2500 Definitely, I would go with solvent whomever says that eco-solvent more environmentally friendly, I don't think they are taking a count the material they are using to print on...
  6. JV33 Cyan banding, Just about replaced everything!

    When I was replacing the head I saw those $900 heads on ebay but after talking to a few people I change my mind because I got scared. What I been told that is there is a chance it will not print 1440 dpi res and if that happens good luck getting it exchanged with a new one. May be they were...
  7. Ordering DX4 heads, anyone interested

    @artbot, I wish the other guy would have a math moment too. :)
  8. cgfx 130 11 cutting speed

    Have you tried to bump up the speed from the control panel or from fine cut?
  9. Ordering DX4 heads, anyone interested

    @artbot, some people can't add up therefore looses their sight of the big picture. Duhhh! 1 vs 3 heads and all three might work for price of one! Think before you speak or make a comment. Right! or know how to add up. This is not a rocket science.
  10. New Bulk System THought id Share

    If he never used it he wouldn't buy a bulk system. I am sure he uses a lot. He is just keeping his investment clean. My guess is he is the owner not an employee.
  11. Can air in the connecter cause a problem?

    Sorry, I should have mentioned. This picture is taken after the o-ring is changed but there is still little air bubble in there.
  12. Can air in the connecter cause a problem?

    Howdy Ya'll, Can air in the JV33's damper connector cause a problem? Check it out in the picture attached to this thread. I can see a air bubble moving and whatever I tried I couldn't get rid of it. I believe this is the reason the tech decided to change my JV33's printhead because he couldn't...
  13. New Bulk System THought id Share

    Redz Signs, Inc., I like pay a compliment to your JV3's cleanliness.
  14. JV33 Heater running constantly?

    You should be able set your heater setting from your rip according to your media settings.
  15. Contour Cutting Reflective

    I have the exact machine. Did you check in the setup to see if it was set for halfcut? If it is then the cut would be off. This tip helped me out before. Worth checking into.
  16. Close a Cover message

    +1 lol.
  17. Please take a look at the attached picture

    It is hard wired via USB 2.0 which really the only way to connect JV33's to the rip. It is a good way of thinking thou if it was a network printer.
  18. M

    Let me pick your brains little bit. Do you think JV33's printhead can be raised in such height...

    Let me pick your brains little bit. Do you think JV33's printhead can be raised in such height so that corrugated plastic can feed thru? Therefore to have an ability to print on 4 to 5mm thick substrates. Only reason I am asking this question is I think you have done something similar to your...
  19. feeling sick all the time!!!

    You can't put your health in a scale with your job. A health person will always make a living some how some way but unhealthy person will be in bed wishing he or she would be working. Get the heck out of there! Oh, also call OSHA! They will know how to deal with your employer. We are not on...
  20. ES3 Ink & Wasatch

    I don't want sound like a wise guy but can't you switch over to SS21?
Top