Search results

for me, it just seems that there is a lot going on.... a little to busy.....to much stuff... just my thoughts......

you will have some problems with latex finish coats... we always use oil base enamels...

we in the new england area get all sorts of coverage by suppliers.... we must be spoiled.. we have 4 major suppliers, with deliveries, by their trucks tues. thru friday.... again, we really are very lucky.... good luck....

before we bought our own equipment we used a guy that blasted headstones... all of his equipment was on a trailer, for the times he would have to go to a cemetery.. he would come to the shop and do the blasting....

while you have the time before going to myrtle beach, look into getting the discount book CLUB KEY...... on line.... have used it for years at hilton head... great savings, great courses.... swing away!!!! chase that little white thing....

craigs idea works real good, have made several of these for the service trucks.. as for the suction cups, they work if you need to move the face around within the sign cabinet....

another welcome from cape cod....

have you looked at 3M 8519 lam......it is our choice.......

the fact that they did little to compensate me for my labor, just wanted to give me more product, turned me completely away from them..... it would make good fly paper, the only problem would be,if the little bugs were able to stay alive long enough to see it shrink down they...

we have used mdo for years... make sure it is 7 ply not 5 ply... meaning there are 7 layers of plywood not 5.... you will find less voids, fewer holes... fenris had it right... it all about sanding, filling, and painting...... not caulking....... lumber yards will try to save a...

we have used a lot of pvc... 3/4" and 1/2" for outdoor use...... you have to be careful with a s/f pole mounted sign, here in the n.e. it will break, if it gets hit with flying chunks of snow......

welcome from cape cod...

we use the backing sheet on the lam as our backing sheet when we feed vinyl through the lam... it all set-up on a roll, why not use it... cheaper than kraft paper....

can you not find someone who has a bay large enough for this truck...... a customer, make some inquiries pay them a small fee for the use of the space, supply your own heat source if you wish.. just add the cost onto the job... you will sometimes be surprised how much space is...

if the tool is nice and sharp you can use it to clean the edge on pvc... it gets rid of the sharp edge...... works great...

signcomp makes 2 dif. sizes... 1 that is 1 5/8" wide, 1 @ 2" wide ... abc signs also has " H " trac.... all made out of alum.

alupanel now makes a bronze 3mm panel in 10'.... just got am e-mail today from my supplier.....they did not have the pricing avail., thinking it would be around $100.00

we have always used gemini trac and polycarb faces.... glue the trac, then we use #45 alum rivets for 3/16 faces... never, ever had a problem.... rivets aprox.8" c to c

check with grimco, they have a few choices... www.grimco.com.... they have a location in orange county,ca. 1-800-542-9941

we live in a resort/ vacation/ year round, area.... there are plenty of people willing to pay what ever is nec. to get their boat to look nice... lots of gold leaf, drop shades, outlines, whatever the want... it can be done right then and there... that the glory of of it.... you...