Search results

Also, check so you don't have your HDD set on PIO mode. I had this problem after a power outage and everything worked in slow motion, including our printer. You can read all about it here: https://www.z-a-recovery.com/articles/power-supply-failure.aspx

The netsh winsock reset command has to be run in Command Prompt using Administrator privileges. Once it’s complete, you’ll see the message Winsock reset completed successfully.

Try the following fixes: - Check in Windows Task Manager so you don't have a background process that keeps your Disk, CPU,Memory, Network at 100% usage. - Reset network adapter using winsock reset - If the above didn't work, try to reinstall the network adapter driver (first uninstall the...

Probably it's an Alpha GD1800-E2...but it doesn't matter that much...the working principle is the same. You can also search on Google for this forum: sign-forum.ru (you'll have to use Google Translate). They know chinese printers very well and could also help you with the software problem.You...

That sounds more like an ink related problem, since it happend after changing the ink cartridge. You should also change the dampers on black channels, that might help.

Sounds like a blown fuse on the main board. Epson Gs6000 Won't Power Up

It might have been a glitch.

You are right...it's not advisable to grant Administrator privileges to software from untrusted source....however, in this case, we are talking about software downloaded from trusted source, like Mimaki...and it's not permanent...it applies only to the software in question. If you don't trust...

You should try these fixes: 1. Try to run the installation as Administrator 2. If the above didn't fix the problem, try the installation in Compatibility Mode 3. Disable "Driver Signature Enforcement" in Windows and then try to install the drivers 4. Disable the toggle under “Let Windows manage...

As I've said in another discussion, I had a similar issue with cyan channel on a Mutoh ValueJet 1614 (almost the same printer as Epson GS6000). It was...the ink?(probably a bad lot). I had to choose between the printhead or ink replacement. I've flushed the old ink with solvent and changed it...

Even if you outgas the prints, if it's too much ink, it will affect the vinyl's properties, not only the adhesive. We had a problem with one of our printers, leaving ink drops on the vinyl. After fixing the problem, we noticed that where we had the ink drops the vinyl became mushy (like chewing...

Well, I guess his luck ran out :) Glad to hear that your printer is running well. The firmware problem...how does it manifest?

Well, first we had a problem with one of the carriage cable that connects the main board with the head board (It broke somewhere in the middle of the cable, causing intermitent electrical contact). Second time was an improper electrical contact in a connector.

Also check if all the pinch roller assemblies have their springs at place (2 springs / pinch roller assembly). Some of them pop out, probably when loading the media.

Every color has its own sub tank and are located below the cartridges. You have to take off the back covers to see them. Ink System - Epson Stylus Pro GS6000 Service Manual [Page 42] Epson Stylus Pro GS6000 Service Manual (Page 131 of 299) Practically, the ink sub tank is that plastic bag you...

These kind of issues are quite nasty...very hard to track...some people end up repairing it like in this video

Some of our printers had similar behaviors...it was quite a challenge

Interesting...never thought that a sensor could be magnetized. What type of sensor was that?

How are things going? Is the printer working well?

Did the technician manage to find out what's wrong with the printer?