Search results

just got a sg3 and YEARS of using a sp-300 but I don't use versaworks, I want to continue using flexi and can't find any profiles anywhere! I downloaded 1 but when I went to put it in production manager it says it's not compatible with the printer! I always use 3551RA but at the moment I don't...

I'm in Deltona between Orlando and Daytona - anyone know of a tech who would come out and service? Also looking to get a new machine, preferably Roland, looking for a local dealer. Right now I've been fixing my super old sp-300 and have come to a point I can't fix the current problem. Any...

Looking for a company in or near Ringtown PA to install a 4-6' electrical sign as soon as possible, 3 foot off the ground onto a building. Am being told electric is run about 3' from where installation needs to be. Have a friend there who is having no luck finding someone. Any help would be...

Have a job that the customer would like to use a little more adhesive in a groove then pay for the correct vinyl. I'm fine with it since it is just going to be a one day partial wrap. We have been using 3551ra with matching lam on all of them but this one is a super special event for them so I...

This will only be the 2nd boat I have wrapped in years but since the first one went rather well I'm willing to try it again. The first one I had printed on 30 ij180cv3-10 with comply and it was great to install. This customer is wanting a solid sea foam green or a solid black with no printing on...

Are there templates for the bobcat uv34xl? It's suppose to be wrapped a solid matte color, but no matter how hard I try - it just isn't working for me. I believe it needs some relief cuts or cuts and overlaps, I can't get it to work with the deep recesses on the hood along with the almost corner...

I have a new accountant and she just sent me a W9 form and asked me to send it to two vendors I have used - Signs365 and Zoo Printing saying I need them to fill it out and send it back so she can send them their 1099s. The previous accountant that was used never asked for that. Is this correct...

I know it varies from place to place and what type of vinyl but what would y'all charge to wrap this? I see they sell kits on ebay for 300.00 but of course I would be doing this myself so installation would need to be included as well as removal of existing vinyl. Also, the pic on the bottom...

Of course after replacing a head, replacing a fuse, I get all the colors back up and running, do the best I can to align everything - test prints look good. Go to print and there is fuzzy overspray. Knowing I had a little bit of a problem with reading the registration marks I have ordered a new...

Any easy fix to this or is this close enough? Installed new printhead but I notice the test print is a tad bit off. I saw where you can use those two screws under where it sits to adjust it but on mine, the screws don't reach in the middle hole and you can only tighten to the right on the left...

I installed a new printhead on my sp 300, this is the second time I have done a printhead install on my own. I couldn't find the old video I used for the first one but found another that walked me through it. Problem is, after restarting - it wants to do this fill ink thing that is wasting all...

I know I have seen this but with the millions of fonts I can't find it and this is the only image I have. Any help would be appreciated! - The second I posted after looking all day yesterday I found it! Sorry!

It's getting harder and harder to find parts for these old outdated printers without ordering from China - then it's a long wait for delivery. I'm needing a cable card with guides for an old Roland sp-300, anyone still sell them or know of someone who does? Thanks in advance!

I am trying to match oracal 970RA color 553 Lagoon but my pantone charts are so old there is nothing even close. I have to send this out to a wholesaler because my machine is too small but the only way they can match the color is with a Pantone number. I really don't want to spend a couple...

Anyone know where I could get a printhead for an old versacamm sp-300 and also get it installed here in Florida between Daytona and Orlando? Or atleast get the printhead and attempt it myself?

Hi all! I haven't been on here in years and thought I would get back on now that I have started my own sign business. (just left a business I ran with my ex for years). Started up the business fine, work flowing out like crazy - then BOOM! Computer crashes, lost all my software, etc. - bought a...

Been bouncing through fonts - looks so familiar - anyone? Thanks in advance! :)

I know I recognize the y.......just can't find it.....

Wish identifont would read scripts. Anyone?

When I look at this I can't help to think it is a bunch of fonts thrown together, but with the fonts these days you just never know. Anyone ever see a font that looks like this mish mosh mess?