Search results

Hi, I want to know if i can create my own profile with Digital Factory DTF edition. I use with Mimaki TXF-300 Thank

Hi all, When I make several copies of the same cut in CM5, with the FCX2000, the head is not always positioned in the same place and it always moves back a few millimeters. After three copies, I have to reposition my head on the cut mark. Is there an adjustment for this function or is it a...

Hi all, Since the new installation of our Mimaki TXF-300 printer, I am not satisfied with the #printing result. I have a lot of #noise about #gradients but also about certain colors. I tried the printer in unidirectional mode but the result is not much different except for a slight improvement...

Hi all, How to use only 4 cartridges instead of 8 in the TPC-1000. I don't use my printer enough and the cartridges always expire without being used. My configuration is CYMK with two cartridges of each color. How connect lines? Regards.

Hi, I need to know how can reduce space between page or "JOB" when i set layout option in AUTOPAGE. I know i can get less space when i use nest option but i don't like this option because all job are print in queue together. I set space between JOB and COPIES to "0" but i have always a very...

Hi, I have a #FCX2000 and this one is very slow #cutting when cut a #circle. is it normal ? Thank

Hi, How do I know if my printer is an RGB or CYMK printer. When I use iProfiler software, I have a choice to make before creating my color profile. Thank

Hi, Does anyone here know where I can find a tutorial on how to remove my head from the JV300 without adjusting it. I want to do manual cleaning and it's very difficult to access. Regards,

Hi, Since updated V. 3.3 on my FC8600, the cutter move at the end of lengh job before cutting, and return on home. I have a new option like "F" for cancel it on LCD. Can i remove this option, because i spend a lot of time ? thank

Hi, I've just installed Cutting Master 5 but my cutting job is not accurated and cutting always offset. I don't think is Cutting hardware because with CM4 all job is perfect. Any suggestion ? thank

Hi, Can you know how remove a feed media after detect paper or before start a new job? My printer feed always about 80mm !!! and i must always back it manually for safe media. I setting pre-feed disable in SETUP menu but i don't fix this issue. Thank

Hi, I have always this error (Y OVERCURRENT) when the traction head go to got the cutter on the left side. The selonoid is ok because i test many time with test menu and it keep always the right time out. Last year, i change it, the spring and many part in the cutter head but the problem had no...

Hi, I would like to know if anyone here has managed to make their color profiles for different printers and have identical colors on all their sublimation printers. I use Ergosoft for color management and I have Mimaki's printers, 2X #JV-33 and a #JV-300. Creating a profile on sublimation...

Hi all, We have a serious problem to print a drawing with a #white part. I have been using a Monti Antonio 853 for four years and I can not solve this problem. We produce #sportswear and bags and others. In the #workshop, yes we have a lot of colored fabrics dust, so I clean a lot of times...

Hi, In this summer, we have a lot humidity ( 50-60% ) and on certain fabric (polyester look like coton), i have a ghost on the first 5-6 inches. After one pass, i flip for sublimed the other side and now, no ghosting and very sharp transfert (sub). I use Monti 853 calendar. I print on paper...

Hi, i don't understand how can evaluate my #ink #limit and what exactly the right file to print in #Ergosoft RIP. When i create a new #print #environment, no profil and no linearization, what setting attribute to maximal ink limit (see my pic included). Maybe no ink limit setting ???

Hi, I have been using Kiian's HI-PRO ink recently on a JV-300 and since then I have a bubble problem that forms on the captop during a long print. The ink seems very easy to lather. Bubbles that form on the captop cling to the head and produce spots and lines on the print. Has anyone had this...

Hi, Does anyone know how to see the number of copies I print when I repeat a job multiple times? Nothing says it in the log. I use Rasterlink 6 now. When the printer stop before complete copies, i can't see the status of my work. thanks

Hi, I use the Ultraflex #banner brand with eco-solvent but it is very sensitive for #finger marks and rub marks. Do you know a brand less #sensitive material. When I change my roll, I always lose a foot unusable #material by which it is #marked. Thanks

What is the best setting for printing #seemless texture tiles #pattern with #PosterPrint #Ergosoft. I have always a little #gap between #copy. thank for your support