Search results

Good morning all. We went ahead and upgraded from VCarve Pro to Aspire software so we can do 3D modeling on our CNC router. We have a program that we drew, but it has some chatter. Does anyone know what we should do to get rid of this chatter? We are cutting a concave pattern on 1/2" MDF.

I am looking for someone who may have Aspire software that can generate a 3D modeling file for us to import into V-Carve Pro. We have the trial version of Aspire which allows me to generate the file we want but we cannot export it or save it to run on V-carve Pro. The file is quite basic. At...

Is there anyone that could take a vector file that I have and convert it into a 3D model file that I could import into VCarve Pro 10.5? I don't want to spend the money to upgrade to Aspire. This isn't something I will be doing frequently. Any suggestions?

Is there anyone that could take a vector file that I have and convert it into a 3D model file that I could import into VCarve Pro 10.5?

Good morning. I'm reaching out to you all in the hopes that someone can help us out. We are printing screen positives using a HP Latex 310 printer, and the clear backlit polyester film we are using is Natura SO800W 54" roll with a 3" core. The profile that we are using and that we have used for...

Can someone tell me the best roll material to print out screen positives for screen printing on a HP latex 310, please? Right now we are using 54" Natura SO800, but we are wondering if there is something better out there that someone else knows about.

Can someone tell me the best roll material to print out screen positives for screen printing on a HP latex 310, please? Right now we are using 54" Natura SO800, but we are wondering if there is something better out there that someone else knows about.

Hello, We have been using Natura media SO800 (Ecosolvent Clear Film) for many years now with little issue. We are using it on a HP latex 310 primarily for printing out black on the film for screen printing positives. The line quality has always been good. The last roll I installed I am getting...

Good afternoon folks! We are prototyping a glass wall hanging that is being printed 2nd surface on a UV flatbed printer. We are using on board primer, color and 40% white. Our concern is that it's going to be installed in a small bath room with a shower in it. We are concerned that the ink may...

Good morning. We recently purchased the Vinyl Master Cut 5.0 software for our Graphtec CE 5000-120 plotter because Cutting Master 4 doesn't work with the new upgrade to Illustrator yet. We have been able to cut a file, but we can't figure out how to cut the same file multiple times. We know we...

Good morning all. We have a product that we cut on our CNC router and then print it on our Mimaki JFX200-2513. The substrate is 1/8" clear acrylic. We have been producing this product since August 2020 with no issues. We have produced over 2,000 parts. We sell them to 6 different plants. We...

Good morning! I'm in need of help. We have a Mimaki JFX200-2513. This morning when I was getting set up to run, I did a height check like always. While it was doing the height check everything looked normal at first. The pin comes down and tries to measure the height. Then the pin goes up and...

We have a Laguna Swift 4' x 8' CNC router. We are new to this machine, and we have a few questions that we are hoping someone can help us with. The software we use is VCarve Pro. We are routing 1/4" clear acrylic (Plexiglass MC). We routed a program with a depth of .08" @ 18,000 rpm and 54 ipm...

Can someone please tell me how to get into service mode on the Mimaki JFX200-2513? Also how to get out of service mode when I'm finished. Thanks.

We are having a backup generator installed at our shop. I was wondering if anyone can tell me the bare minimum power required to keep the pumps recirculating the ink on the Mimaki JFX200-2513.

We have been using our HP latex 310 for several years and for the entire time have had color consistency issues when printing to canvas. Color calibrations, replacing print heads, changing ICC profiles has done nothing to aid in consistency. We are using Flexiprint Basic as our Rip. I have been...

We are using Flexi Print HP Basic for our RIP software on a Windows computer. We draw in AI on a Mac computer then send the file to the Flexi software on the Windows computer. Everything was working just fine and has been for years. Our IT department has made some changes in our company network...

Can someone please help me identify this font?

I'm having issues with the onboard primer. I have clogged and deflected nozzles. I've been trying to get them back. I have done a couple 6 hour soaks. By soak I mean doing a nozzle wash, and then when the timer starts I turn off the main power. I did recover some of the nozzles with those soaks...

We are running a Mimaki JFX200-2513. The rip that we are using is RasterLink6 Ver 5.15. When we print white over top of color (2nd surface), we are noticing that the white is slightly off. Can anyone tell me what I need to do to fix this?