Search results

We bought a 9700 converted to sepiax and you have to print super super slow and we have had a problem with the colors not lasting outdoors after 3 months mainly yellow and blacks with lamination. The price point looked great on paper but the headache left us just switching back to our eco...

I was extremely skeptical until I did some shopping around....found a great one and can't believe how much more they offer besides (cracking your back). The one I go to has a $30k waterjet massage machine....and is $45 per visit without insurance. I will say this....be careful about the...

whatever you do don't call printheaddoctor.com / printhead911.com

are you getting ink into the syringe? are you hearing air leaking? Did you make sure the ribbon cable was super clean and the printer was unplugged from the wall during the entire operation? Keep pulling ink through manually with a syringe...do not apply too much pressure! Its a simple...

20/20 was declared junk a long time ago.....like over 2 years ago when it was 10/11 or whatever it was called. In regards to Roland oem eco solvent ink. I personally have bought printers that have been setting for 2-3 months cold with the dx4 heads and was able to get them unclogged and up...

20/20 was declared junk a long time ago.....like over 2 years ago when it was 10/11 or whatever it was called. In regards to Roland oem eco solvent ink. I personally have bought printers that have been setting for 2-3 months cold with the dx4 heads and was able to get them unclogged and up and...

My father always said....lay with the crazy you gonna get crazy. Hope everything gets better for your circleville.

tropic thunder?

call Mark Rihne at imagers supply in KY. He is a great tech who will give you more info than you ask for. 3125 Preston Highway Louisville, KY 40213-1103 (502) 636-0123

(I just found this below online these are not my words but its been a while since we had to do this and I believe its correct. Your service menu access code below maybe different depending on your firmware. has your printer had a big temp change in the past week or so? I know we sometimes...

USMC, 0103 is cutting limit sensor error. We had this happen when temps and humidity would fluctuate. This can also be caused by a head crash. You will need to do a cutting carriage assembly alignment however this may not fix it. Throw down your model number and more stats for...

Here are 4 service code options attached for you. I keep these on my phone. Some of them are pics taken directly from the forums here. Some codes I notice will not work the first time but the second or third try they get past the service protected option. I have went through the exact same...

Power off printer. Find black hose connected to the Magenta cap top going into the ink pump. Disconnect it. Put the end of black hose that was on pump onto a large syringe. Make sure the heads are resting on the capping station and power is off. Then pull back on the syringe mildly. This...

I have been thinking about posting on this Print Head Doctor company for the past few months. I will make a separate thread on this when I have time with some photos for everyone to see. I bought their $2200 deluxe kit. The guy I spoke with Mark makes it sounds like he has millions...

Thanks for all the responses everyone! I went with home depot and got 12- 8ft high output fixtures with t8 bulbs The fixtures are about $59ea (on their website) and bulbs are $7ea and each fixture has 4 bulbs. I wanted to stay away from the t-12s. I went with the cool white as I installed the...

What kind of fluorescent ceiling lights are you running in your shop? Anyone have any reasonably priced solutions for say a 1500sqft area? 4ft or 8fts are fine with me....prefer 4fts with 2 bulbs though. Im not looking to drop 2k in lights....I have 10ft ceilings fyi. do you guys...

Epson won't let you transfer warranty on the machine and they won't let you get a new warranty if your not the original owner. Really doing a disservice to the seller in the second hand market on this printer with 2 printheads, poor take-up system and not had all the kinks worked out yet. Grimco...

Mcdonalds has been doing this for years.

ebay or nazdar.

This is incorrect. You will need to find a dealer who will release the dip switch settings to get the printer to say its a SC model. Once the correct switches have been made you can then use a copy of versaworks.