Search results

I saw a while back someone posted that they couldn't get there older Roland plotter to work on Windows 10. I realize there is no support for the older machines mine is a PNC 1050. But others claim that you can run the older software in windows 10 in using in compatibly mode to install it ...

I have a customer that has a race car he is restoring that was a friends that passed away, and wants to match the numbers on the side I went through my font's and don't find anything close can someone tell me if this is a custom font or someone identify this ?

I'm trying to connect my US Cutter Vinyl Cutter to My Dell Inspiron 3520 with Win 10, I'm trying to hook up my Us Cutter Vinyl Plotter to this computer, when I go to install it, the plotter doesn't show up like a Printer like on my desktop Win XP, it shows up under other devices as FT232R USB...

I have a customer that would like me to cut him some decals for his business, he had sent me a rough idea of what he wanted so I laid it out and tried to cut it out, as you can see the lettering is too small and doesn't weed very well and isn't going to stick very well either. Any suggestions...

I'm looking for some sand rail vectors to cut a logo for a customers decals. I haven't found a good source does anyone know of a good source for this type of Clio art . Would also like trucks cars as well.

I was offered a d60/u vinyl cutter that I'm told is not working. I realize this is an older unit but I would like to get another unit to back up my US cutter. Is this something worth messing with? I have heard a lot of good about summa

I currently us Corel draw x5 with my Roland to cut vinyl. I was wondering if anyone has found a way to cut directly.from Corel to my US cutter MH871. I have exported from.Corel and imported into sign blazer but I don't care for that way. Or is there a suggestion for a lower cost...

I'm wanting to split this Logo in the center to put some text in the middle of the two halves, (TOP and Bottom) I can get the Circle to split but the "V" and "W" come with the Half I try and Move. Can this be done in Corel Draw X5 ?

I have been playing with inkscape and tracing, some images. but when I import them into Corel Draw x5 they are somewhat distorted, most the trace looks good but like one of the letters or part of the image goes off on an angle. Is this something I'm doing wrong or is this because it's a...

I had a customer contact me and wanted his logo made in this same font, can someone tell me what font this is ? To me it looks similar to Times Roman

I have a Roland pnc-1050 hooked up to my desktop computer via serial port, and I picked up a US Cutter MH871, I can run the Us Cutter off a USB port but I have read about reliability issues, So I was wondering if it was possible to run both of the cutters off Serial with a switch inline ...

I picked up a couple of older Heat presses, one is a Perma Trans PT-80, and the second is a THP industries model 300, both appear to be in decent shape, and I was told they were being used, I picked them up to try my hand at Print wear. Does anyone have any input on these machines ...

I picked up a US Cutter MH871 cutter the other day the previous owner lost the Blade holder, I was told a Roland Blade holder will work, does anyone have any input on this ? also is there a good place to get one reasonable ? Also does anyone have any input on these machines ?

I have been cutting with my PNC -1050, and for the most part I think I have it figured out, but some times the vinyl will be cut, but in certain area's the backing is being cut through, and if I'm cutting two decals side by side they are cut through on the same spots. sometimes they are letters...

I have a question about the settings on my PNC-1050 ? When the Power is over time does the settings return to default ? is the Offset set by the blade or the material ? My current settings are Offset 10 and Speed is 20 Thanks

I have CorelDraw x5 and I'm using it with my Roland PNC 1050 I have a couple of issues or questions 1) If I read correctly I need to cut in Landscape rather then portrait ? I have tried to cut several items, and unless I set corel to cut the item out of the top left corner it prints all the...

I finally got my PNC 1050 up and running, tonight I made my first couple of cut's, and they turned out ok, But my plotter sounds like it's laboring, working harder then it should, I believe I have the blade adjusted correctly, and I have tried to adjust the plotter pen force, and have gotten...

Is there a way to view and cut eps files with coreldraw x5? I thought I might be able to import them but my import buttons are not highlighted

I bought a pnc 1050 and want to use it with my dell laptop. Windows 8 and coreldraw x5, I bought a USB to parrellel cable. And down loaded the drivers from Roland site. But I can't seem to get the laptop to find my cutter do I need a different cable? Or Driver? Or a null modem cable ? The...

Well after purchasing CorelDraw x5, I tried to install it on my dell will windows 8 and it says it's not compatible, and then it says check the web or continue, If I click continue it takes me to Corel and wants me to update to X6, Has anyone else experienced this ?