I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I have the problem of having my squeegees never drying completely out and eventually they start to mildew. I'm wondering if anyone else has the problem and what they do to stop it. Is it simply a matter of buying a lot more squeegees and trading them out more often or does everyone just replace...
I work for a shop that is preparing the purchase our first CNC machine. None of us have any previous experience with them. I think we're going to get the 4'x8' shopbot. Can anyone recommend a vacuum for the hold down system that would be sufficient for holding coroplast, pvc, maxmetal, etc...
I use a Roland VS-540i and I've noticed that if I say, have 100 stickers to print/cut, the plotter won't necessarily cut each sticker in order - for example if I have a row of 10 stickers it'll cut the one on the far right first, then skip ahead to the 4th, then back to the 2nd, then over to the...
Hey,
Our shop has a versacamm that inserts about two inches of dead space between each job we send. Is there a setting on the printer to adjust this?
Thanks for all the help!
Kyle Stewart
Does anyone have any suggestions for a wide format cutter? It needs to be something that can make 96" wide cuts. We currently have a Foster General Purpose Cutter, but it seems to have bowed in the middle and isn't cutting straight.
Thanks for the suggestions,
Kyle
The rubber tire on my right side pinch roller for a VS 540i has started to roll off the wheel. It's causing massive skew issues. Is there any easy way to get the roller out of the machine to replace it? I've removed the block but I can't get to the screws on top of the roller to take off the...
I've noticed banding from my magenta head. Cleaning the head and aligning the printheads is not totally correcting the problem. As I recently put in a new magenta cartridge I decided to calibrate the color but in the middle of doing that the printer crashed (79:04). Come to learn that meant I...
I'm looking for a way to create custom shortcuts in flexi. For example, I'd like to create a custom shortcut for "exclude common" that's listed under the effects drop down.
Thanks in advance,
Kyle
I operate a vs-540i and I have a 0109 error, I know all I should have to do is move the carriage down and move the wipers until I hear the telltale click, but my wipers are in such a position that the print-head carriage can't go past the wipers. Isn't there a way to separate the cutting...
Recently we've noticed that instead of getting a nice clean smooth line cut in the vinyl we're getting a series of dots - what could cause such an issue? We've replaced the blade a number of times and I haven't had this problem before. It makes it especially difficult with smaller lettering. I'm...
I recently replaced the blade on my VS540-i, then sent a set of 2x3 oval decals to print/cut.
For some reason, the first decal gets cut completely out of the vinyl - the rest are fine - I made sure to decrease my pressure after replacing the blade but I'm not sure if I installed the blade...
Hey all, I have a job involving a King Tut exhibit and, while able to keep the client from wanting Papyrus, they are still insisting on one of the fonts I've attached - does anyone know what they are? I think one may be Optima but not sure.
Thanks!
So we got the VS 540i last year and it's great, but there was no take up reel option, so we fitted it with the one that we were using with the SP 540v. It works for the most part but is not ideal - has anyone heard of a reel for the vs 540i?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.