Search results

Did you make sure there is no ink or cleaning solution on the FPC cable? Normally if there is any kind of short near the FPC you can kill a the motherboard.

You need to check the printhead and FPC cable connection. Most likely you have ink or a bent pin on the end of the cable.

We carry them on out site under the Mutoh section along with other parts.

Mimaki parts Never heard ears of this Chinese company. But if you need OEM Mimaki, Mutoh parts, you cmay find them at the link below. They are cheaper than directly from Mimakior Mutoh. there are warranties on all parts.

Print head travels hello my friend, of course you can adjust it. What rip do you use? Wasatch, ergo, Mimaki raster Link, onyx, or what? Once you adjust media settings, go to general settings on the rip to change it as well. You can't change it on the printer.

Print head black channel Hello, sounds like it's still a good print head you may just need to flush It. Did you also check the pump, making sure it pumps properly? Pull from the pump to see what happens. also check capping position. after tryi these two things, if it still drop out...

Its simple to change the ink set on jv300s. Log in the printer to technician change the setting and ink type. It will take you 10 min or less. If you use Ergosoft rip software, matching colors will be much easier. You can print multiple squares with different receipts. Of course if you have...

You can try different ink profiles / types within the 1204 settings that might help. Seems like the biggest issue is any color with cyan as the dominant color?

Is the issue mostly in cyan / light blue colors? Try using a digital microscope and see if your getting satellite dots. You can check the test pattern under a microscope to see if your dots are breaking apart and creating satellite dots. It might look like the picture attached. I have had this...

When was the machine built and where is it located? Water base or solvent? Thanks

The clear dots are totally normal most heads ship with liquid in the print heads . Have you ever replaced a print head on this machine before? If not I wouldn't recommend doing it yourself.

You can turn off the auto clean feature by pressing function > setup > auto clean OFF.

We have 100 for $29.00. https://www.inkjetparts.net/collections/sublimation-supplies/products/copy-of-inkjet-cleaning-swabs-100-pieces

We have high quality swabs here. More puffy and durable than most. https://www.inkjetparts.net/collections/sublimation-supplies/products/copy-of-inkjet-cleaning-swabs-100-pieces

We are a start up company starting to sell different types of swabs. https://www.inkjetparts.net/collections/sublimation-supplies/products/copy-of-inkjet-cleaning-swabs-100-pieces

$22 swabs / double tipped / JUMBO / single We carry single tipped / double tipped and jumbo swabs. Check out our site.

What RIP are you using? Have you ever had anyone profile your machine?

What RIP software are you using? Normally when I have a cyan dot mixing in with yellow I will create a custom color and remove it.

print head how much did you pay for the print head? where did you get them from? they don't provide warranty for the print head?

Mimaki JV5 issue It's not normal to replace 10 print heads over the last 3 years. JV5-160 is just like JV33, its a work horse. We have installed hundreds of JV5s over the years, but never seen customers replaced that many print heads over a short period of time. What type of dye sublimation...