epson

Hello, I'm admittedly a total sublimation noob. Wondering if it would be possible to convert my Epson f6200 4 color printer to 8 colors and use different inks? Guessing I would have to do all new color profiling in addition to adding a bunch of hardware.

Epson S80600 w/ 10 color ink setup. Includes your choice of Wasatch or Ergosoft RIP as well as additional maintenance cartridge and 11 additional ink cartridges. Asking 14k obo.

This printer still works good. We have replaced the head one time since we purchased it. We have purchased a new printer and no longer have room for this one.

We just got a new S60600. Head alignment checks via the panel are dead on and everything else is dialed in. Regardless of rip settings, profiles, lots of trial and error, and doing everything imaginable the S60 is not producing clear sharp type like our old S30670 does. Nowhere close...

Anyone who has a service manual or link for Epson surecolor s30670 please contact us at: axiomart@sbcglobal.net Also, can anybody provide info on how to access tech menu via LCD screen on same printer? Thanks! Ron

Great working condition, factory serviced through Epson since the beginning. 1 print head replaced 4 years ago and color print head replaced last month (May). Printer comes with Onyx RIP, and take up reel. We recently upgraded which is why we are selling. 64" printing width is great for...

My Xuli X6 with Epson Dx5 print head is showing "FTA Epson the print head error occurs" anyone have an idea of what the problem is?

Printed about 5 yards of 54" material (Avery 1105 vinyl). Went to load the next roll and now it's bunching up in the middle after it's been loaded and does its precheck. Everything was going fine with the first roll. Tried a new roll of material same thing. Have adjusted the feed roll so it's...

Hi all, we're looking for a new printer to replace our JV33 on 2x CMYK. After reading a lot en seeing a lot we came to the conclusion we go for the Epson 80600 because we're familair with eco-sol inks ...but our Mimaki dealer came back in interest with an proposal for the new UCJV300-160...

Hey there! Wondering if any one can give me a real life experience with ink dry time the Epson s80600.We had a roland XR640 with ecosol max2 inks and white ink installed and it was painfull having to wait 24-48 hours before being able to manipulate white prints. Anyone able to give me a...

hello, I buyed a epson sc-30600 and need to transport it to our office. Does anybody have a guide or service manual what kinds of action need to been taken before we move the printer? Head must been locked but need to know how so could anybody help us please?

Hiya, I'm after a dx7 printhead, preferably an older one with coding f and below, this can be found on the bottom of the sticker on the printhead. Very much appreciated, thanks in advance

Hello all just got a GS6000 only issue was orange channel is gone. When printing the nozzle check I get nothing on the orange channel on A or B. I cant see any airbubbles in lines, cartridge is almost full (80%). Cant seem to find a rhyme or reason as to why its out? This is our first...

Hi all My Epson 50610 has been great however recently I have noticed pausing during printing. The higher the passes and even during uni-directional printing, the printer will pause, print , pause, print until the job is complete. It does not start slow but during a long run pauses and becomes...

I have an S80600 that i am having banding issues. I now have it on 12 pass. I have tried multiple materials along with our in house created profiles and canned profiles. Almost all things printed with 8 pass band as well. I have done an auto media feed adjust and i also created a new media...

Our SureColor S30670 has an issue we cannot resolve. We purchased the machine in 2012 and had pretty good success with overall usage with minimum down time. We have used Onyx 10.2 print software since the purchase. Over the last few months we have noticed an unusual condition. When doing long...

Hello to everyone here! I am in a desperate search for the "servprog.exe" for an Epson 7900 printer. Nothing to find on the Internet or no responding pages. So, this forum is my last attempt! Please help me :-) Thanks a lot!

A couple of weeks ago my VJ 1604 started missing nozzles and when starting a print it would be really saturated for the first inch or so and then the print seemed to get a faded look, I did a couple of head soaks and cleaned the maintenance station and started printing at 1440x720 and it seemed...

Fellow printer people, I decided a month back to install a Chinese made printer hack to fool my printer and make it believe the cartridges are always fool, and thus saving me around two thirds on ink costs in the future. How it works or should work is this, you make sure all is running fine...

Hi everyone, i´m from Argentina and overhere Epson is changing the old S30 for the new one S40600, Epson are selling S40600 low price for the old owner of S30 (they say this special price is for the trouble occasioned with the S30) I want to ask you what do you think about the plotter Epson...