issue

Hi Guys, So I have an issue with my VS540i. So my old printhead has been leaking whilst idle. Ink droplets would just drip from the printhead whilst nothing was happening. I've noticed this when I did a manual clean as I could see under the printhead. As well as this the printhead will often get...

We have a Summa D140. It was tracking kind of roughly but then one of our middle pinch rollers broke. We ordered 4 new rollers and have installed them. Since then the machine does not track properly at all. Keeping jobs small in size is doable but we have a large print shop and many of our...

Hello everyone, im an apprentice and still have a lot to learn about wide format. And i was hoping any of you in here might know what is going on here, because we havent been able to solve it. This is about a UJV55 mimaki wide format printer Recently in the production we’ve been having an...

Does anybody know what is causing these marks? Obviously the printhead, but always in the same axis and never in multiple areas. It repeats every once in awhile. Doesn't make sense with a printhead in motion to have a non-strike or smear mark. I have physically cleaned

Hello! So... I might have goof'd. My boss told my to take out the print head from the VS-420 to change the dampeners. I did no problem. Here's where I regret not taking pictures in the process as a spring came loose . He came back with the print head a few days later and told me to put it back...

Hi! im having this issue when i start to use the cutting mode. It looks like the cutting starts to moving and the end points don't match. The curious thing its not always do this kind of error. Some one has a clue of what happen with my machine? I really will appreciate any help. Here...

Hi all, We have a serious problem to print a drawing with a #white part. I have been using a Monti Antonio 853 for four years and I can not solve this problem. We produce #sportswear and bags and others. In the #workshop, yes we have a lot of colored fabrics dust, so I clean a lot of times...

Hey guys, I have had this summa plotter probably for less than a year. It has recently started acting up. Whenever i put in a new roll, it goes through all of its starting motions but then it either tries to unwind the whole roll or it shoots it out the back. The rolls just keep on going until...

Hi all! Can anyone shed some light on why Onyx won't open certain PDF files? It's not every single file, but now and then it simply doesn't load the file. It doesn't even acknowledge that a file has been imported in the console in the bottom right. Help? Thanks in advance!

I recently purchased a jv3 130. When I purchased it I was given a Texas Instruments 1394 firewire card for my desktop. The firewire card is working great on Windows 10. My issue is I'm not sure which driver to download from the Mimaki website to recognize the printer. The gentleman I bought the...

Trying to print a bunch of posters with a gray gradient background. The image file is a jpg ripped as an EPS out of flexi. The gray gradient background keeps making this strange blotchy color pattern. Any suggestions on how to get rid of this?

OK, This is the first time I have ever really had material not take ink properly. I'm printing on 60" rolls on my HP L26500. The center 40 inches or so print PERFECTLY, but the sides are mottled and you can see the ink is not being accepted well by the vinyl as it's beading up. What I did...

I am trying to print a blue overlay on wood background in Flexi12, Issue is the blue looks good on screen but prints purple . Any suggestions? Thanks

Hi guys, Just wondering if anyone using Illustrator CS6 and FineCut 8 has an issue where it sporadically decides to ditch the connectivity settings in exchange for settings that clearly won't work. We've configured the IP of our CG130-SRIII on all of the machines connected to the print network...

I have seen this in a few takeaways where they have a number of flat screen tv/monitors showing their menu. I guess the easiest /cheapest way to do this as flat screen TV's are becoming cheaper is buy a few with wall brackets and mounted to a gantry. The biggest issue is obviously you will need...

Hello for some reason we suddenly have a working disk C: issue and can only load one or two jobs at a time. What might cause this? Working disk C is at 94 % Physical memory is at 64% 3.9GB Any assistance would be appreciated

I have a very urgent question for the Signs 101 Community... Over the span of the last 3 months our wonderful printer started to develop this disgusting habit of printing Cyan Blocks randomly in the upper quadrant of our prints. When I say Blocks I mean perfectly sized Cyan/Light Cyan Print...

One of the yellows keeps dropping out randomly while printing. At first, I assumed it was caused by air in the lines somewhere. So I syringed it and it would work for a time and then drop out again. I then replaced both the yellow dampers. Problem still happened. I just tried swapping the...

Hey Guys, I just had to re-install signlab after a previous computer died just wondering if anyone the same issue the dialog boxes are massive.... Cheers Cheyne

Hi guys, I have a big Q and haven't been able to figure it out. Some of my images need to be printed in sRGB, some in ProPhoto and some in AdobeRGB. I configured the default quickset to use sRGB as the RGB Image/Vector profile and checked the 'Use Embedded Profile when Available' checkbox. I...