print

I know that onxy 12 rip prints bar codes and the arrow when you contour cut but is there a way to print labels or information as well?

Hi, My VS-640 has light cyan ink dripping from the head. It is a consistent drip. Ive replaced the cap top and wipers and did manual cleaning to confirm there is nothing causing the ink to drop like a wick draws fluid. Im thinking it is the damper, but would only 1/2 of a damper go? Ive...

Got roland SC540, bought used a few years ago. Does a great job, as I'm a small shop, not using every day, etc. My question is regarding the print modes. I had the Roland service here about 8-9 months ago for a tune-up, and all works well until lately. Whenever I get ready to print a job, the...

WOuld like to know if the print head should be in the down position when placing the printer into sleep mode. I know it will go through cleaning cycles during the night, but my concern is the print head drying in the upward position. I always turn the printer off when finished at the end of the...

Hi, We have the capability to print 60" here but it's just two faces at 60x144" on white translucent. Something I'd rather job out than purchase the vinyl and laminate for the one job. Our 61" laminator is also a little fussy about 60" prints (we run 54" day to day). Can anyone here print...

We acquired a small competitor recently and they have a Roland Soljet PROIII XC540 Print & Cut. We have been printing with it and everything seems to work fine. The previous owner had it serviced several times a year and he was as meticulous as anyone I have seen about that sort of thing. The...

Hey All! I was just perusing a solvent vs latex thread and came across a great number of comments on eco-solvents being able to actually dry quickly. I'm curious, what all are you guys using? We use 20/20 Color, 440 ml for our Roland SolJet Pro III and SolJet Pro IIV, then Valuejet ultra eco...

anybody out there been able to print on reflective and match the Ruby Red reflective color? I am printing out of Versaworks on a Roland XR640 designing in Illustrator. I am sure there is some profile setting (to embed or not to embed?) that would make it work... I am needing to print some...

I am loosing my mind i think but can someone please tell me how to cut a simple cut path file. No print no contour cut. Like i want to cut my name out of white vinyl saved as an illustrator file?

I'm looking to add flooring to our print room. Right now it's that same gross looking concrete as the rest of our shop with decades of stains, paint, holes and whatever else. It's also hard to see dust and debris that has accumulated since it blends in with the floor. I was thinking either some...

Hello! Im wondering how do you prepare you print files... I usually do jpeg, 200dpi, anti-aliased, high quality (80%). i heard that tif or eps is better... i tried eps, and results are little better, but it takes a lot of time do export eps. I was thinking that some settings might be...

Im getting a misfire on one of the black channels. When I print an image, it looks as if Im getting a color bleed, like when a damper gets a few drops of different ink in it. Upon further inspection of the color bar that is printed along the margin, I noticed a set of black dots printed directly...

can someone recommend a clear vinyl plus laminate that can print on a solvent printer with a combination to be about 3 mil. Will print white then color on top then laminate .Dont need air release adhesive for vertical install . Looking for mid quality like oracale level.

XJ 540 Printed all day long yesterday and had perfect nozzle test prints, not a single missing nozzle. Was setting up to print other side of 48' trailer wrap and test print was missing a ton of black nozzles and a lot of cyan. We did a manual clean, it got worse. We did a medium clean and...

hello, i have a print job that is about 11.7" tall but it still tries to break up when I print. I even tried a small square and it seems to enlarge everything... please help .

When I try to output all to print a job it says its larger... Notice the size bottom center: 11.6 x 14.5 This is after output all... look how it says its larger... 11.83 height but not sure why and I cant print today...

I have been trying to modify oracal's print profile for 3751. We love the profile, prints great, but there is only 1 quality option, 8 pass(high quality). For large trailer wraps we'd like to print at 6 pass (standard), or for smaller detailed graphics we'd like to print it at 16 pass...

Hey guys, Printer is three years old never an issue.. the last few months we had issues with print quality and recently cuts drifting.. Print head was replaced last week due to a bad strike that well rendered it messed up. BUt right now, when i print.. we are doing some logos for a client...

Looking for a wholesaler to print reflective real estate signs, small order, print directly on .040 aluminum or reflective decals & I apply. Appreciate any help, Thanks!

There was a post a while back for a software that can automatically create a two up print double sided for color copier. we have a few pro ricoh machine and do a small bit of odd flyer's and marketing media. i was looking a simpler solution for my shop to automatically nest jobs. i don't want to...