roland xc 540

Hello well my question is simple, i'm running versaworks 5.4 with an XC540, i'd like to upgrade to versaworks dual or version 6, do you know if it's possible ? on the Roland website it seem to be not possible...another way perhaps ? by forcing it ? thank you

It seems to coming from the cutter potion of the cut carrier, If I separate the cutting potion from the printing potion and manually move the cutter across the length of the printer I can feel a clunking noise and feel it in the head. I will attach a video. It doesnt do it constantly. but i keep...

Looking for any help or suggestions you may have? At my wits end! A few days ago my XC540 was just finishing a job and it was going to park. It made a clunk nose and beeped. The code 0106. After googling it, it said to do a Limit initialization. So I did this by pressing and holding left, up...

bought an XC540 that needed work, replaced a bunch of parts however I'm still hearing air coming from the cyan head. replaced all 12 dampers and all 6 cap tops, also replaced the manifold for the cyan head and there's still an air noise when pulling with a syringe from the cap top. placed the...

Hi, can not figure what's happening. The printer has 6 heads . The 2 furthers to the right heads are Ml and Cl respectively. What happens that when printer left for a day or 2 sucks the Cyan light UP in the Magenta light head up to the damper and a bit up also. Both are connected down at...

About 2 years ago i was hired and the company bought a truevis vg-540 to replace the soljet xc-540 as our primary machine. The soljet is about ten years old and has issues now, but the way the boss tells it, this machine has been incredibly reliable and easy to use getting great results with...

Hello there. I am experiencing severe problems with connecting my Roland printer. (I have a Roland Soljet Pro III XC-540 printer) which I have been running for many years without problem. Now, for probably the first time, I have encountered a grave issue which I do not how to resolve. First...

Hi Guys really need some help on my Roland XC-540 it has been offline for around 2 months now. The CYAN & Magenta is not firing at all I changed the fuse and it has blown almost instantly when I put it in and turned it on. Luckily I have a spare fuse however thinking there is no point putting...

Hi Guys, Had an old thread however not had much luck with it. I have a xc-540 and I have no magenta or cyan what so ever I believed this to be a issue with the fuse as someone said I could have blown the fuse when I was trying to fix my 'sensor eye error' I have since ordered 3 fuses and...

Hi Guys I have been having endless issues with my xc-540 this week firstly I kept getting sheet set error finally after a few days changing different things I changed the sensor and it worked fine however my issue is now I am not getting and Magenta or Cyan after multiple cleans etc nothing...

Hi this morning my machine randomly showed sheet set error pinch rollers in correct places had this machine a long time so tried the following; Tried loading just a sheet with edge detection etc a piece of vinyl in too.. Cleaned encorder strip, Made sure the cables are in properly. Prior to...

Good afternoon, I have searched everywhere for help with this, to no avail, so I'm coming to the Pros! I'm trying to Print, Laminate and Cut. I have enabled Print Crop Marks on the dialog in VersaWorks, made sure it's Print only and sent. Went it goes through the printer, it won't print the...

I have a serious problem as of today with my light cyan and light magenta. Started by noticing the prints were getting really fuzzy, did a test print all looks fine. I remembered how to put it in service mode so I did a fill print and the results are in the photo. Dropbox - 20170207_191859.jpg...

Im going to try and not be so wordy but very descriptive: I have an XC540 ProIII - My problem started when running a test pattern. The Black head was missing a full side, I ran a few medium cleans and no luck getting the head to fire. I dismantled the machine to check the dampers and the...