Hello Everybody

[Anthony Allen]

Greetings and salutations to all. Obviously i am a newb here , so please forgive my ignorance.Basically i want to manufacture my own t-shirts which are text based i have decided that a vinyl cutter would probably be best coupled with a heat press. So its the usual stuff: which one is best/value for money/any pitfalls with the system/other options etc. I have no prior knowledge and am doing this from scratch so I have to consider the financial side of things.Any help here would be greatly appreciated. I just want to get it right first time! respect.

 

[VinylCraft]

Hello and Welcome to signs101. I was in the same place you were and found this site 1 yeand and 1/2 ago VERY helpful resourse's here. Frog around with searches and chances are you will find it if not ask there are alot of people ready and willing to help.

Cheers

 

[Marlene]

Welcome :Welcome:

 

[The Big Squeegee]

welcome

:Welcome:
Be sure to look into digatal printing of t-shirts. Digital will be around long after the screen printers have given up. Good luck at whatever you do.

 

[Git-R-Done]

:Welcome: 2 :signs101: . Glad to Have you!

 

[Anthony Allen]

thanks for the welcome everybody!

 

[ENTDesign]

Welcome

 

[GregT]

Welcome and join the party!

 

[WVB]

Welcome from Amarillo, TX..... For a vinyl plotter look at Roland, Graphtecs and Summa's. If you like to save some you can buy a SSK Designtech from sign supply of kentucky. It is actually a graphtec relabeled to SSK with less features of course. In terms of a heat press figure around $400-$700 for this alone. There are a couple of places you can go for heat pressess. Try imprintables.com or you can do everything from SSK.

 

[sandblast_dude]

Welcome from the Midwest.