-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
How much do you guys charge to replace sign bulbs that require a bucket truck?
- Thread starter WhatsYourSign?
- Start date
Gino
Premium Subscriber
What do you think would do it for you ??
Figure in the cost of the truck, the man in the bucket, the lamps being used, all the insurances, maintenance, distance for the truck, whatever other work might be needed while you have the cabinet open and most of all..... how much do you wanna make on top of all that ??
Are you replacing or retrofitting ?? Most places are using the LED sticks and wiring in new power sources. Can you do that ?? Can you test and make sure it's the lamps and not a driver or ballast ?? Can you do it if the electric is off due to a sensor or timer ?? Can you hook it up to your truck for extra power.
We just had one a week ago, where the power was turned off, so we hadda hook up and power the sign with our generator. That happens quite a bit.
Figure in the cost of the truck, the man in the bucket, the lamps being used, all the insurances, maintenance, distance for the truck, whatever other work might be needed while you have the cabinet open and most of all..... how much do you wanna make on top of all that ??
Are you replacing or retrofitting ?? Most places are using the LED sticks and wiring in new power sources. Can you do that ?? Can you test and make sure it's the lamps and not a driver or ballast ?? Can you do it if the electric is off due to a sensor or timer ?? Can you hook it up to your truck for extra power.
We just had one a week ago, where the power was turned off, so we hadda hook up and power the sign with our generator. That happens quite a bit.
Texas_Signmaker
Very Active Signmaker
Average can be anywhere from $125-225/hr. Double or triple your material costs.
Decal Dennis
New Member
Depends on the truck you have. We charge $195.00 per hour for a 2 man crew out in a 70' bucket/crane plus parts. $145 per hour if it's just one crew member
Richard2717
New Member
$85/ hour with one man for the 42' truck in our area Anything bigger and it is $140/hr and more
Customers often get irritated by those rates. That's because they don't think it costs us anything to drive out to their businesses to swap out a lamp or ballast. We pay out the wazoo for worker's comp insurance premiums along with all kinds of other stuff. So we track the amount time a crew member is up in the air versus standing on the ground or driving the truck due to the different rates for those job activities.
ams
New Member
You should keep your truck stocked.
LED Signs & Designs Texas
New Member
You guys need to charge a minimum PERIOD!!! We always give an estimate to relamp/ballast before we ever leave the shop. They can say yes or I will do it myself.
You have the chance to sell them a LED upgrade. Explain most manufacturers pay for a full 5 year (parts & labor) warranty to justify the pricing.
We have 7 trucks, run 20 hours a day, 6 days a week. Don’t let the electricians take these jobs away from us. Good luck guys!!
You have the chance to sell them a LED upgrade. Explain most manufacturers pay for a full 5 year (parts & labor) warranty to justify the pricing.
We have 7 trucks, run 20 hours a day, 6 days a week. Don’t let the electricians take these jobs away from us. Good luck guys!!
signage
New Member
I would also like to know!
DAVID MARSHALL
New Member
We are the only local signage company that owns an EWP. Our rates reflect the usual cost of hiring one because that's what our competitors will have to do. Half day minimum, just like the hire companies. Our WHS laws mean that there always need to be at least two staff where an EWP is in use. Without going into the specific numbers because it will be different where your business is, we charge at least half a day hire for the cherry picker plus normal hourly rates for each staff member, door to door.
signbrad
New Member
That's how you do it.
Be wary of using someone else's rate. Your expenses, overhead and profit are uniquely yours. An accountant's advice is worth the money.
Brad in Kansas City
Notarealsignguy
Arial - it's almost helvetica
you link spamming? You cant screw up 12 volts DC, it works both ways.
OF COURSE YOU CAN. one way everything burns up and ends up in the garbage can!
Notarealsignguy
Arial - it's almost helvetica
You may be right. I dunno how many battery chargers that my employees have burnt up by hooking them up to 24v, I have even drawn them a picture of how to do it right. Never underestimate stupidity