-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Hp Latex 330
- Thread starter PaulD987
- Start date
balstestrat
Problem Solver
Your trailing cable (data) is most likely fucked and needs a new one.
www.signs101.com
www.signs101.com
www.signs101.com
HP Latex 115 Trailing Cable Issues/Replacement
We have an HP Latex 115, and it is a great machine... But we have somewhat consistent errors with the trailing cable. Usually, we are able to "fix" it by some combination of jiggling the cables going to the carriage, turning it off and on, or completely unplugging it and re-plugging it in in...
www.signs101.com
HP 365 latex error 11:10 (Trailing cable is not connected)
Hello everyone. I'm having an issue with my 365 latex printer. Next day after printing constantly without any issues, I turned on the printer and got an error code 11:10. This has happened before (about 6 and 10 months ago) but after restarting a few times (I read online that unplugging the...
www.signs101.com
Need Help - Strange alignment issues with HP L360
Had my belt replaced recently on my HP L360. Everything has been running really well and I haven't had any issues. Spent the entire day printing and then started a long print. Three minutes into the print its like my carriage decided it was done and slammed right into the edge of the printer on...
www.signs101.com
Geneva Olson
Expert Storyteller
interesting I thought it might be a headstrike. Good to know.
balstestrat
Problem Solver
Well it's best to check the looks of the cable first before doing anything else.
Just lowering it down from under the top panel and checking it visually.
But if those marks always tend to come at the same spot in scan direction then it's the cable for sure.
Just lowering it down from under the top panel and checking it visually.
But if those marks always tend to come at the same spot in scan direction then it's the cable for sure.
Thanks so much, I will check this!Your trailing cable (data) is most likely ****ed and needs a new one.
HP Latex 115 Trailing Cable Issues/Replacement
We have an HP Latex 115, and it is a great machine... But we have somewhat consistent errors with the trailing cable. Usually, we are able to "fix" it by some combination of jiggling the cables going to the carriage, turning it off and on, or completely unplugging it and re-plugging it in in...HP 365 latex error 11:10 (Trailing cable is not connected)
Hello everyone. I'm having an issue with my 365 latex printer. Next day after printing constantly without any issues, I turned on the printer and got an error code 11:10. This has happened before (about 6 and 10 months ago) but after restarting a few times (I read online that unplugging the...Need Help - Strange alignment issues with HP L360
Had my belt replaced recently on my HP L360. Everything has been running really well and I haven't had any issues. Spent the entire day printing and then started a long print. Three minutes into the print its like my carriage decided it was done and slammed right into the edge of the printer on...
Thanks so much