VJ-1204 Maximun Thickness ?

[Compilla]

Hey Folks,

Anyone knows What's the maximum media thickness you can use an a VJ-1204?

Can't find any info on Mutoh's America Website...

 

[SE SignSupply]

Can't say for sure but I do know 1mm PVC prints great!

 

[randya]

1204 or 1204AS?

 

[MacDaddy]

Is there a difference in what media each will handle Randya?

 

[randya]

Is there a difference in what media each will handle Randya?

I dont really know, Sign Warehouse will know about the 1204AS,

The thickness spec for the 1204 and the 16xx is a bit misleading, the spec is 0.3mm, but this is for calibration purposes, realistically it will handle the standard 1 mm media thickness in high head height.

The difference being that the machine is set up and calibrated using 0.3 mm thickness (uni and bi directional adjustments), so at 1 mm media thicknesses these calibrations are not going to be optimized. The thicker media are usually banner and will not show any noticeable differences in set up.

 

[MacDaddy]

Good Answer..............................