Recent content by regardstobuck

We have a latex 360... our epson does a little bit better job than the Latex. What is the We have a latex 360. The epson prints much better on chrome than the latex tho as far as color, what is the problem you are having?

I was having some banding issues on my Epson S80600, the test plots all came up fine so I calibrated the media feed and head alignment and when I started printing again there was a slight rubbing noise whenever the carriage passed over the right edge holder. I took off the edge holder and the...

Arlon slx or slx+ Avery 1105

I've been trying to get a print done today and I'm getting banding on only the green on my prints. I have done nozzle cleaning mutliple times and the nozzle checks come out great but when I'm printing on 8 pass I get horrible horizontal banding. I tried on a 12 pass and it worked good but then...

Thanks for your input. The onyx support sent their print cut file and got the same error. We reinstalled the software and it’s working great now. Somewhere a file got corrupted we have no idea how.

Yeah, I called Onyx Support and they remoted in. According to them everything checks out and its probably just a re install angle, so hopefully that works.

"Because it's giving you this error we know your file doesn't have "CutContour" on it". Unfortunately this isnt true, Cut Contour shows up in the Named Colors on our file. Any other ideas?

Hey all, Recently when we go to add jobs into Gamaprint RIP-Queue they add fine but when we go to print the job we get the error message "a cutter is selected but there are no cut data for this image". I found this guide, attached below, and everything checks out the same as the...

We were getting a lubricate the rail message at least once a week. Which we would do immediately. We didn’t know about the oil reservoir on the printhead carriage as it doesn’t say anything during the lubricator procedure. Things progressively got worse until a scan access error on start up...

This response perfct ✅ Nice work!

We do a lot of graphics for sleds, Mx, and sxs. Substance is the best. Let me know if you want us to print and cut your kit for you! We stock the vinyl you’ll need. Could be easier, cheaper to outsource.

I fall Under the category of entrepreneur/diy guy. I definitely can get myself in and out of some sticky situations! … right now I own an Epson s80600 and a hp latex 360. I’m wondering what is involved, and how hard is it to change the print head on the Epson? Any special tools or software? I...

You can if you want the color to be more opaque. Usually we just print color right on the chrome, the lighter the color the more chrome effect. We use both Hp latex and Epson printers.

We can take care of you. We print moto and snowmobile graphics! I stock substance chrome. Dm me we would be happy to help.

We do quite a few box trailers and have tried quite a few different manufactures. When you have flat panels like a trailer you want a vinyl that will stretch little as you squeegee. We used to use a lot of cast vinyls like ij180 cv3 and 1105. Great products if your wrapping something with...