Recent content by SkyPrintAlex

I just bought a graphtec fc8600. I have a lot to learn. I went from using my versacamm to print and cut, now I'm trying to use my versacamm to print, then laminate and go into the graphtec to not slow printing time up. I'd recommend it because I know what it COULD do. I just need to learn how to...

Don't so it! No More Rolands for me. Look at the HP360 latex printer. Seriously. After doing my research I will never by a solvent printer again. I have that right now I have to wait at leave 24 hours to laminate. It's a big headache. I hear those are about 12-14k, leaves you the difference to...

So here I was dealing with not being able to print while the damn versacamm was cutting. I was delayed on jobs so much I'd have to come in on the weekends to get work done. I started teh hunt for a separate print solution. I figure "I already have a Roland, might as well stick there." I had my...

I have to say I've had a great experience today working with Bobby at CS. He took the time to explain everything I was asking and took the time to look up my serial number to make sure what we were talking about matched what I needed. I would highly recommend purchasing from them. Thank Guys! Alex

I have to give a huge thank you to these guys! I ordered a test roll from them back in maybe August. I never had a chance to use it. I moved into my new location and found the box so I printed a sample on their bubble free gloss vinyl. I have to say I love this vinyl. I usually print on Avery...

I've never gotten a job like that, but a buddy of mine told me early in my career of signage that getting a contracted job for like coca cola is a pain because they always send you the material transfer taped and you have to install it that way. I think it would be a total headache to install. I...

I would hit up a forum sponsor first, if not, I got all that from NuSignSupply.com this last week when they came to do some work on my machine.

I use Nusign Supply in Industry. Pretty much the only techs I trust. Did you check your IP address after to change to the cross over able? If you are not getting a DHCP address then you are going to default to a 169.x.x.x number. You need to set a static IP on both Machine and the printer that...

I'm with the last comment of the cap top. When is the last time you changed it? I have a tech here servicing my machine and my cap top was destroyed. He said he was super surprised I didn't lose any nozzles from how back of condition it was. If that's not the problem, are you getting any errors...

I have a GCC Expert Pro. It's okay. I only need a 24 because I can cut anything bigger on my versacamm. The think I don't like on the GCC is that you will only get about 22.85 of media. The guy that I bought it from said... "you can use the whole 24 width because it cuts to the outside of the...

This laminator http://www.ebay.com/itm/New-1520mm-60-034-Hot-Cold-Laminator-Roll-Laminating-Machine-Heat-Assistance-CE-/291218234092?hash=item43cdf59aec&pt=LH_DefaultDomain_0&quantity=1&autorefresh=true And http://www.uscutter.com/USCutter-LightningLam-Lite-63-Heat-Assisted-Cold-Laminator...

Thanks for the information. Kala isn't within my budget right now. I'm going to save for that one. I wanted the Maestro that's about 12k. I told him if he wants me to buy it now, I only have about 1500 for a laminator (Separate account I use to save for machines and other equipment. I just let...

Hi everyone, I've been looking for a laminator for a while. I contacted someone I know that I use to lease the laminator through. He is willing to sell me the laminator. It's been in storage since after we returned it to him about two years ago. what should I look for? Flat spots on the...

So I've been more active. Trying to be a productive member of the community. I've learned a lot just in the last few days. I've been able to provide some information. Thank you for the welcomes!

Very impressive!