Search results

Hello. I have been having a couple of problems with flexi 10.5 printing to a Mutoh Value Jet 1324 The 1st problems happens all the time and it seems that when I use a gradient fill - in this example, I have 100% Violet C fading to White. The problem is - the shade is way off than if I just...

I was thinking of purchasing the USTECH MVT-500 laminator and placing it between 2 8' shop tables that are lined up even with the rollers. My thought is that this may be used as a budget flatbed system of sorts since it has electric roll lift and also forward and reverse. I realize that it is...

Anyone here print or know of a wholesaler that prints on plastic cups? I have a customer looking for 2 color logo on approx 6 ounce plastic cups. Thanks! Mike

Hello - I purchased this complete Maintenance station from Digiprint before realizing that my head was bad in my Mutoh 1204. It was only installed for half of a day because I re-installed the old one before trading it in on my new printer. Here is the link to the one I have...

Just purchased a new Mutoh 1324 from Sign Specialists (great people to work with - by the way). I have it set up and running, but the prints are not as good as my old 1204. Here is the rundown... Same exact file with no changes to the colors, same material - 3M IJ35 Gloss. New printer...

Hello - I just purchased a new printer (Mutoh 1324) and it is not supported in my current version of FlexiSign (8.5). It did come with the Mutoh Version of of FlexiPRINT SE. I do not really design much in Flexi. I used it more for adding a contour cutline and outputting to my old Mutoh...

Machine is approx 4 years old and has worked flawlessly up until about 2 weeks ago when I noticed solid black was not quite as black as before. Did a nozzle check and noticed that 1 of the 2 black "blocks" of nozzles were approx 75% gone (the other "block" of black was near perfect). Al other...

Hello. I have a Mutoh ValueJet 1204 that is used almost always on a daily basis (aside from weekends). Last week I was printing a bunch of logos and noticed that the black areas appeared to be a bit washed out looking. After a nozzle check, it appeared that approx 50% of black was blocked...

I am using Flexi 8.1 - Value Jet 1204 - Graphtec FC 8000. The size of the design to be print then contour cut is 26" x 40" When contour cutting - the leading edge seems to be lined up (not perfect, bu close), but the final edge is off my almost ¼". I have gone through "output size...

Hello - I recently switched to Flexi 8.1 from 7.6. My old version of Flexi made the contour cut reg marks approx ½" or so & this newer version makes them approx ¾". Is there any way to make these smaller? I am using Graphtec Type 1 Automatic as the setting. Thanks Mike

See attached photo. Just today, my Mutoh Jr. started depositing 100% black ink in a certain area of the print path. It does this every time I print & it is always right around 2" x 5" from the bottom of the vinyl. It is printing lines so I know it is not just ink spilling from the print...

Hello... I sell a bunch of boat registration numbers & would love to add an interactive page on my site where the customer can enter his reg number, choose a font from a list, add outlines/shadows, choose colors & then see a preview of what his complete set will look like. I see many sites...

I was having connection problems & I was pretty sure my old router (Linksys) was the culprit so I purchased a new router (D-Link) My printer is a Mutoh Falcoln Jr & is connected using TCP/IP with the SEH Intercon Printserver. After hooking everything up, I open InterCon-Net tools...

Anyone know the name of this font? I thought it was DNS'a stix, but it is a bit different - especially the "R" Thanks!

I see a few have been having problems with their Graphtec cutters, but my problem is a bit different. The cutter has worked fine every since I purchased it new up until a week ago. I noticed that once in awhile the cutter would make a bit more noise than usual when cutting (only once in a...

Hello... My router (Linksys Etherfast Cable/DSL) needs to be replaced as the internet connection is very slow. I replaced it with a cheap 4 port wired router & now the internet works fine, but i can not longer connect to my SEH IC105-fastpocket-tx. I have reset te SEH & reinstaled the...

Hello... I have a Mutoh Outdoor Junior 36" Printer. I have had a problem for the past couple months when the printer sits idle even for just a few minutes - it seems as if the Black & Magenta colors need to be "primed". When I start to print - the magenta starts off really dark & then starts...

Hello - I am considering purchasing a Mutoh Value Jet. The new printer will come with Flexi Sign Pro 8.5. I already have this software & do not need another. Is there anyone interested in purchasing the new software? Just looking to help offset the cost of the printer since I do not need...

I was wondering how wide the junior prints in each pass of the printhead. When I do a nozzle check - it prints approx ½" thick band in each pass, but when I print from my rip (flexi 7.6) it seems that it only prints approx .125" in each pass. Is this normal - if not what should I check? I...

I'm stumped on the name of a this font & any help would really be appreciated. Thanks! Mike