Search results

I'm doing a little servicing of my JV33-130 and am currently replacing things like fans, cables etc. In relation to fans, should I stick with like for like (eg, extractor fans) or can I upgrade for a more silent fan of the same size? I would assume it wouldnt have any issues. But before I start...

I'm currently in the process of reviewing laser cutters/engravers for my business. It's not a huge market for us at the moment, so I'm not keen in spending $40k on a machine. However, I've been looking at some 60x CO2 machines on Ebay. Are these machines ok for entry level use? Mainly being used...

I'm trying to sort out the best cleaning cycle for when my printer goes to sleep. I leave it continuously running as my techie informs me that it's the best because the head detaches from the capping station when it goes into sleep mode. this can result in the possibility of damage to the head...

as my post suggests, how would I know the time to replace my capping station? Are there any obvious tell tale signs to see, print quality, tests or indicators to notice?

Mainly for convenience as I am finding it hard to source ES3 ink from anyone here in Oz, but has anyone done this? Do I need to completely flush the lines with ES3 solvent then SS21 solvent before switching over the inkset? Are there any other do's & don'ts?

Does anyone get ES3 ink in Australia? 1 ltr bottles I am after

Has anyone replaced the castor wheels under their trolley for a JV33? As it's kinda hard to look at the bottom of the castor assembly while the printer is on there, I'm somewhat flying blind. However, it did look like it was only a 3 screw fixing to the foot. Is this right? If I cant find a...

Hi all, I have a question relating to the domed/lensed decals. More directly towards beer tap decals. when creating die cut 75mm dia (3 inch) labels, approx how many mls of resin/gel are you allowing for per badge? we're starting off at the very novice level of creating these for customers and...

Pease help me before I loose the little hair I have left on my head. I'm using Cutting Master 4 with Illustrator CC 2017, and up until last week, it's been fine. Now when I send a job to Cut & Plot, the entire image dissapears as soon as the actual "Cutting Master" window opens. I mean when I...

Can anyone assit me here in setting up rego marks either in Illustrator, or Rasterlink so I can cut it on the graphtec plotter ? Here's what we use: Adobe Ai CC Rasterlink pro 5 SG SignCut pro 1 Mimaki JV33-130 Graphtec CE-5000-120 previously, using Onyx, I had no issues. Now with rasterlink...

I've recently installed print profiles for our new(old) JV33-130 and am currently doing a print swatch of all the different profiles. My ink sets are ES3. CMYK dual channel Unaware to me, the profiles we have been testing are all for SS21. Fixing that little hic-up, and now running the profiles...

Hi all, I hope this post may help some people with their issues with Onyx. If you are after legacy copies of Onyx, then go here: https://onyx-rip.de/support/download-onyx/ It's in German, but the google translator sorted it out perfectly for me.

I have a copy of Rasterlink to swap for another rip. Feel free to message me here and lets talk

Hi all, Long time lurker, first time poster. I've been running Onyx Production House for about the last 10 years with our 2 x ColorPainter 64's. I've just purchased a Mimaki JV33-130 and I'm having issues getting it to talk to the rip. Other rips are fine. (Trial Onyx Thrive21, Trial Flexi...)...