Search results

I've been given something from a clients "Designer" and asked to make their signs from it. They gave me a PSD file that is crappy res and I need to recreate it for 3D. Can anyone tell me what this font is?

Back again with another question. When I print onto ACP or similar, It drops the bed all the way to the bottom just as it starts printing then I keep getting this error warning that says "Head High". I normally only use this for printing braille signs and these are flat sheen, 1.2mm thick...

Is there a way to assign a spot colour in Ai (or other design program) that when imported into RL6, it will assign a specific coulour adjusted profile? I.E. When I import artwork for braille, I need to assign the 'white' profile from illustrator a new colour profile. I bring in a file, go to...

CUrrently, I'm creating 2 files. One full colour and the other white. Is there any way to create and only print one file that combines both? I.E. White base with CMYK print on top? I would like to half my print time with this process

from the images below, and some info, can someone please advise what is my issue here? Running JV33 on dual CMYK so... after printing about 1m (3 + feet) my K is completely dropping out. Currently I'm doing some hard cleans in between each print and it seems to revive one K channel, and not...

ON my Mimaki JV33 dual CMYK, I had issues where only one of the yellow channels was firing correctly. The other only had the top half nozzles showing and a few random nozzles. I few heavy cleaning cycles and general maintinance got it flowing again. But... Then I lost half of one Kay channel...

I use my UJF mainly to print braille signs. I'm currently using LH-100 inks. No problems when using this, but recently after printing a couple of signs on 3mm acrylic, I've noticed that it probably isnt the best ink to use as there is no flex to the ink. Majority of my suppliers sell this ink...

Can anyone assist me here on this font? I've tried Gotham & Aharoni, but both aren't quite on the money

Can anyone assist me here? If I turn my UJF 3042 off and leave it overnight/next day, when I come back and do a test print, half the nozzles are missing across various channels. If I do a few cleans then it gets it back up. I'm meticulous in cleaning and maintaining the machine, so I know that...

Can anyone recommend that "papery" stock used on wine and craft beer labels? I've been using the standard vinyl for this application, but I've seen that slightly textured/papery feeling stock around if late. Its also waterproof.

I'm currently in the process of reviving a dead CJV and I need a little advice. I'm changing the current configuration of CMYK Or Lb White Silver to dual CMYK but I'm not 100% sure on how to config the lines/dampers. I've replaced all the dampers and flushed the lines out. I've bypassed the...

Can anyone please advise what these parts are and where I can source them? Mimaki Aus have gone quiet on me. It's the recirculation part for the white and metallic silver inks.

Can anyone please assist me with this error code and the fuse it refers to?

I purchased a CJV150 for nix, Mainly because it came with ONYX and i wanted that more than the printer. I was told there were issues with the printer and it's been sitting dormant for a good 6 months. Long story short, I've managed to get it back up and running except the print head has...

I would like to reach out and find or even create a little database for some printer techies in Australia. This could be a little broader to cover other brands of machines, but since I own all Mimaki machines, I would like to start here. Does anyone have contacts for a techie in or around the...

If anyone needs a copy for their machine, I'm getting rid of one. https://www.ebay.com.au/itm/185567783913

Can anyone direct me to some specs or kits available to do the maintenance on my machines? Not looking for the standard fluid, wipes or Q tips, but more the syringes, tubing etc. I'm not sure what size I need for the syringe, so any kit I can get online would be grand.

I am hoping someone may be able to assist me here into what has happened with my nozzle test. I was performing a routine maintenance on the 3042, and I did a nozzle test as normal. Excluding a couple of nozzles that were missed, all channels were relatively fine as you can see in the image...

If I put my 3042 into sleep mode (power off), when I power it up again, the Cyan channel drops out completely. I can put it through a cleaning cycle and that always rectifies the issue, but I would prefer that I don't have to do this. My alternate option is to keep the printer powered up in...

Printing braille on the ujf, and as I am building up layers (overprint x9) I'm getting this ghosting/overspray. Is this cause to check the alignment of the heads?