Search results

Im not sure... If you pulled off the damper and pull ink does ink come out? You really need to verify that the cartridge valve is working properly. Then swap the dampers (even though they are new). If the problem remains with the cyan then I would assume that there is a leak between the damper...

You could also swap the lines going into the dampers of the cyan with the lines going into one of the adjacent colors. This would confirm whether the issue is before or after the damper.

Have you tried replacing the ink cartridge?

Are you trying to say that you lose your cyan head in between prints? It prints fine until it goes to the capping station then your cyan drops out? What about when you get to work in the morning? Is your cyan printing when you first turn on the machine?

graphics solutions group

Gsg

Agreed

In response to artbot- Im not sure what types of payment plans vutek offers but ours is right around $6000 per month and its a four color.

The 4x8 print time was just a benchmark for you to go off of. Yes you can run multiple sheets through the machine at the same time. The only issue would be the edges cupping up but you would run into that problem with a single sheet as well. We usually just tape the corners down or raise the...

I have been running a qs 2000 for several years now. As far as speed goes, the qs will print a 4x8 in 7 minutes on heavy(8pass) bidirectional with a head height of 60 mil. The quality is great so long as the material is flat and you're able to run on these settings without raising the...

I took a minute to google it. I'm not sure if any of this will help. Fix the "3A6 error" code. Clean out the "bird nest" of threads by hand or a piece of cloth. Close the knives completely and press the "SET" button to reset the error code. Press "START." Read more...

Can you post a nozzle test?

Not sure on pricing but we use Prime Printer Services when we need parts for our vuteks. They service machines too. I know they sell spectra heads.

Does this machine have inline ink filters?

Are you seeing fisheyes or just a blotchy looking print? Is it throughout the whole print relative to ink coverage or is it just a few here and there in a random placement?

The monday morning you are referring to, is that before or after replacing the ms?

Good to hear its working.

Does your machine have a 16 pass count option?

Oh so I thought the vp was like the sp with black and cyan on the same head. Well can you pull the heads and swap say cyan and magenta? Or if it would be easier just switch the ribbons so that cyan is receiving magenta data and vice versa? Either of these tests would rule out a lot. And soaking...

hmm.. Pictures would be nice. Are you getting any overspray? Is it throughout the entire print the same or does start off good and then get progressively worse? The hairline you see is this located in the middle of one of the bands as the machine prints or is it not noticable until after all of...