Search results

I literally just found the mesh material in my Fellers catalog...thought it was an indoor product. I was going to try the Sonnet brand since it was the heavier of the products listed (9oz). Thanks

My customer needs banners for an outside location that has high wind conditions. Has anyone had success using perforated banner material such as Pano Star for outside applications? Other suggestions welcomed. thanks

great advice. I think this also solved some of the general problems I've had in the past using the wrong bit in my hammer drill...."borrowed" hammer drill.

I need to attach Gemini stud mounted letters onto a concrete wall covered with pebble aggregate. Any suggestions on how to drill it with minimal "walking" of the drill bit?

Thanks, Bryan

None of the white glows, but I also did not check any other materials. Just came home from the customer.

I printed on Ritrama's Wall Walker "Fathead" material and left a 1/2" border around the design so it would glow when exposed to a black light. Everthing in the room that was white had a glow to it....EXCEPT the white vinyl !! Any ideas why the white vinyl doesn't work under black light...

THANK YOU, JAIME !!!!! IT WORKED !!! You just saved my butt and a ton of extra time redrawing the logo. I knew there had to be a way. :notworthy:

use 3M cast with cast laminate, same as a vehicle wrap. you'll get good conformity. Don't attempt to do the entire thing in one piece. you should be able to cover the entire sides and back with one piece, just use a separate graphic that ties in over the top of the design and trim accurately...

I designed it in Flexi, converted it to an eps and sent it Versaworks. unfortunately I never saved it while it was in Flexi..."Do you want to save changes to Untitled 1" message appeared and i just closed it out. Now it's in Versaworks in quere A listed as an eps, but I can't figure out how to...

Just realize that some of these doors are actually made of wood sections and painted with crappy paint. The hardware tends to rust quickly through the paint, so adhesion would not be something i would warrant the same as the sides of the box. Justin Pate has a training DVD called "Realwraps...

I sent an eps file to my Roland SP 540i and forgot to save it in Flexi. The file is now in the "RVW" format. Is there any way to retrieve the file back out of Versaworks as an "eps"?

Thanks for the advice and feedback, guys. I'll definitely look into this.

Where would you buy these steel rule dies?

I have a customer that wants 4" round pcs of Komatex PVC 3mm thickness. Using them as floating advertisements in the refreshment tub. Anyone familiar with using a cutting die to achieve this instead of using a router?? I also get requests for round magnetic material...curious how that...

Thanks guys. Good advice

I have a customer that needs real estate signs painted in white. The signs are 4' x 8' panels positioned vertically and supported by 4" x 4" posts. The posts extend 11' out of the ground ! I am not crazy about pressure treated wood because it's wet when purchased and tends to twist when...

Thanks for the heads up

I am looking for advice on outdoor temporary floor graphics used on asphalt. The only product I am aware of is MACtac StreetRap. Anyone trying this or other products with success?? I want to use the digital prints for sporting event advertisements. Thanks in advance.

Excellent feedback. Thanks again.