• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Love those customers who try blaming me for their mistakes

    I made 100 signs for a guy last year he put them all out on street corners where he wasn't supposed to and the city came and took them all away within a few days. then he does a credit card chargeback. The credit card companies wouldn't even help me out.

  3. JV 33-160 Prints are coming out too short.

    yeah i'd say its feed compensation. go into set up and see what the setting is at. also, when printing you can adjust the feed compensation. i'm sure you will need to increase it.
  4.

    Some recent work

    Nice work

  5. Anyone going to SGIA in Vegas this OCT?

    I'll be there http://www.getcustomized.com

  6. Just replaced my dx4 printhead jv3-160sp

    I use it in my Solvent printer with OEM SS2 Mimaki Inks.

  7. Just replaced my dx4 printhead jv3-160sp

    Got a head strike last month from the wiper getting stuck half way out and as the carriage passed over at start up, the cyan head center went right over the top of the wiper, bending the head and leaving a scrape in it. It did still print however but missing nozzles and left spurts after each...

  8. Does the JV3-160SP print on clear vinyl?

    just an update: I was able to print on clear laminate and it was pretty good. My customer was happy. Thanks for the help everyone.

  9. Does the JV3-160SP print on clear vinyl?

    Well I have OEM Mimaki ss2 inks CMYK X 2. Guess it's worth a shot. Thanks for the tip.

  10. Does the JV3-160SP print on clear vinyl?

    I got a request from a customer if I could print on clear vinyl. It is possible with the JV3-160sp? Does it hold up well? thanks

  11. Need RIP software for Mimaki JV3-160SP.

    Found what I needed. Can't figure out how to delete this thread
  12.

    JV3-160SP Horizontal Banding on right side

    I am getting some banding on my printer . It's heaviest on the right side and gets less and less prominent as the print moves to the left. The machine is level and I pulled the media all the way thru then rolled it back up. Media comp is also adjusted. 16 pass bi directional. seems to get worse...

  13. Need RIP software for Mimaki JV3-160SP.

    Anyone have a RIP for sale that is compatible with JV3-160SP.
  14.

    Need Help JV3-250sp Overspray and Nozzles Missaligned, Droplets..

    I had the same problem with my firewire board jv3-160sp Mimaki. It was plugged right into the 4 pin connector(1394A) from my laptop and about 20 seconds after I turned on the printer I get a long beep with an error. I even tried it on another laptop and same problem. Luckily I had a 1394 pcmcia...
View older results
Top