Search results

Hi Over the last few years we have used Avery Dennison Squeegee Pro as our preferred application squeegee. At the end of last year Avery in their infinite wisdom changed the felt material that was applied to these. The felt now fails and wears out at a quiet horrific rate and is costing a...

Over the last 10 years or so I have been purchasing and updating our vehicle outlines from a company in the UK. I am beginning to see a larger discrepancy in the outlines. Although they look correct, when creating graphics to fit the panels their can be up to 1" or more difference. In the UK...

We have recently tried the new 3M Envision Print Wrap Film 480Cv3 to replace IJ180Cv3. It prints brilliantly and the laminate is super glossy and almost crystal clear. The only issue is that compared to IJ180Cv3 and even stating that 480Cv3 has controltac re-positionable it most certainly does...

I am trying to see if their is an issue with to what speed you should laminate vinyl graphics. I am having some issues but no where in the manual does it state how fast it should run. Can someone please help? Cheers SC

I have an issue that the ethernet socket is failing on my Valuejet 1604 and needs to be held in a certain way for it to work. Does anyone know where I can buy a new ethernet socket to solder onto the board. As Mutoh are saying the only way is to replace the whole board, which is huge expense...

Yes it's on the way!!!! Well let's hope and pray that at last they are running a true 32 bit programme. Because it is about 5 years behind every other design software. SC

Hi all I am looking for this script style if anyone can help. Thanks SC

This looks like Murray Hill but it isn't. It looks so familiar. SC

Well the Christmas Holidays are coming soon and the rush has started!!!! Seems to me, that even though this Holiday comes around every year it still always catches some people unaware. We shut down over the Christmas/New Year period and trying to finish on the 22nd. But the mad rush is...

We have an Easymount 1600SH top heated laminator which we purchased second hand. Although this is so much better than our old chinese cold laminator. I am still having issues with getting prints to run straight and no matter how I install them it still runs off after a couple of metres. Also...

I know this is normally not allowed!!!! But I have a guy with a 1966 Mustang Fastback requesting viper stripes to the bonnet, roof & Boot (Trunk). Due to being in the UK and their not being many mustangs around our outlines don't show such a vehicle. Also I need to know what would be the best...

Well I have spent the best part of this weekend trying to get the old JV3-160S running again. I have just managed to get 3 good heads into the machine, one I have just bought and the other two I had which had been flushed and stored away. I decided to install the two previous heads alongside...

We currently have a young person that has been handed to us by a training company. He seem to have what I can only describe as the "right stuff" so we will be taking him on. The issue is the training company wish us to take them on as an apprentice after his trial period. This will entail us...

We have an old JV3-160SP which I bought a few years ago very cheaply. It had been offline for quiet some time but over the last year or so I have replaced the caps, pumps, dampers and have now managed to get 3 completley perfect heads for it. Also I have a bulk ink system which will make this...

We have an old Bunny 1400 Laminator (Economy Unheated Model) It says it was manufactured in France but looks like a Chinese model. Over the last few months I have had some serious issues with it. When laminating it either doesn't laminate in the middle of the print or if you tighten it down it...

I have had an issue with our valuejet 1604 disconnecting of the network. I thought I had traced this to a suspect ethernet cable. I had the network cable taped up against the power cables supporting it. Last week we had the print room re-floored and had everything disconnected. This was a good...

OMG with this site being offline it was like I was missing a limb!!! Good Work You Guys

We have a Mutoh Valuejet and I am trouble hitting, or even coming close to a yellow colour. It is a colour based on Oracals 651 range of vinyl. Oracal ref 020 RAL 1033 HKS 5 I have played around loads and just can't get it to look as bright. Does anyone have a RGB or CYMK reference that has...

We have had our Valuejet 1604 from new back in 2007 and it still is going strong! Over the last 2/3 months I have seen an excessive amount of debris/dust/dirt on our prints. I was at a loss where it was coming from until last week and it seems to be coming of the rubber rollers which clamp the...

It looks like Bodini Bold but it isn't. Cheers SC