Search results

The network socket is faulty on my valuejet 1604. I have managed to get by over the last few years, but just lately the disconnections have become more frequent. I have sourced a similar socket, is this a simple job once the main board is removed? I also have a 1614 which has been butchered and...

Still waiting on new head cables! I have changed the manifold on the print head as on removing the damper one broke of on the cyan. After unblocking the Black K line as it was solid where the needle goes into the cartridge and reseating the head so it sits correctly . At long last have it...

I have removed the pipe work from my dampers on my new to me 1614. But on one of the dampers the plastic nipple came away from the manifold. Is their a way to repair this or replace the whole manifold? Thanks SC

Just about to buy a cheap VJ 1614 as a back up. The guy has already chucked a ton of money at it with motors, encoders, etc. But he says it comes up with a Printhead Heat Error. What could this be? I am guessing either a faulty head or head cable or maybe the head board, or all three. He does...

My old Mutoh 1604 has a problem. The Cyan ink lines drain back and have air in them when I caome in on a morning. Am I correct in assuming this is a damper problem and need replaced with the O rings? Or is this the internals of the head creating the problem? I am hoping to buy a new one in the...

On my 1604 if the headheight is on its lowest setting it can touch the media . Can someone explain how to reset the head height to its correct height? Thanks SC

When exporting a file as a JPG/BMP it can take 5 minutes to do. Size is A4 @ 350dpi. Has anyone come up with this issue? It does this on a couple of our signlab stations. Thanks SC

I printed a number of full panels for a wrap onto a new transit L3 H2. I have noticed a slight colour shift on one panel. Each panel had a nozzle check to check that all the nozzles were firing before printing. The colour shift is very very slight but is across the entire printed area. Hopefully...

Well after fitting yet another maintenance station into our 1604 the test print is showing no blocked nozzles and prints as good as the day it was installed. It is now Seven and Half Years since I had a new print head installed and firmly believe that if blocked nozzles are attended to when they...

I was about to upgrade my PC to Windows 10 and was going to copy the Cadlink folders onto another storage, just in case of failure. But I have found 3off files with a huge size within the Signlab folder. They are called:- Embedded2464 Embedded2512 Embedded3856 Embedded4028 They all have a...

Is it possible to use a font with ligatures? SC

In the last month I have had a slight tick as the print head comes over the guide plate. I do most of my printing with the head on the high setting but this afternoon I dropped it and it will catch it and move the guide plate across. It looks as if it is not the head that is touching but the...

I have a customer who has a fleet of vehicles that will require a half wrap on his silver vehicles. The colours fade from Blue to the silver of the vehicle half way along. My thoughts were to print this onto clear wrap and laminating it and applying to give the effect that this fades from the...

Hi All I have annoying noise which seems to eminate from the carriage of our nearly 12 year old VJ1604 when printing. I have always been vigilant keeping the carriage track and bearings clean. But out of the 8 bearings I can only maintain the facing ones and the top rear bearings and track as...

Yesterday I had some customers come into my shop for a new sign for their Chinese Takeaway/Restaurant. Strangely they had almost everything they needed except a tray sign to mount it all. It was a little confusing as to exactly what they were after, until one of them returned from their car with...

I am working on a personal project which requires a image or program that can produce high quality ripped metal effects. The idea is to have prints on a vehicle that look as if the metalwork of the vehicle has been ripped open to show something else underneath. This is where it gets difficult...

The Cyan on my old 1604 is leaking back on one of the cyan channels. Will this be a damper/O ring problem or do I have other issues? Maintenance station is about 2 months old and I have no other problems with colours except one of the cyan channels. Thanks SC

I am having some issues with printing 3Ms SV480mC Wrap Material on my VJ1604. It is very hard to picture it, but it looks as if the material has a static issue and the ink is being drawn onto the material. This is 3Ms new updated PVC free wrap material which is just a strange material and even...

Has anyone found a cheaper source for Spit Pads for the Mutoh Valuejet? Or has anyone found a cheap alternative? Thanks SC

After cleaning all my drain pipes and spit tray last week. I have a fine spray of what looks like black ink appearing onto the print bed. I thought this was a build up of fluff/lint around the print head due to printing banners. I have found some banner material reinforcement material can come...