Search results

I've tried it and I still have horizontal banding.

on all media, but on cheap poster paper is a bit less visible. But like I said, after changing the ink maintenance kit, there still have banding but they are thinner now. no texture. It's a gradient, but the lines would be at 45 degree if it was the gradient. If only I had another printer, I...

at 10 pass, everything is fine if I print four 12inX12in squares (CMYK). I saw some minor banding in the black, but I have to look at it on a certain angle with certain light. But the 3 other colors are perfect. The print test is very good also I've always printed at 10 pass for everything...

I've used the glassapeel frost last month as a printable frost material. I needed something that the visuel was looking good both sides. You need to print at high density to have good colors, but the look is very good even very close. I even used it to make small second surface decals (10in X...

I have to say I did not try other pass than 10. So, the printhead cleaning kit have been changed this monday (with the ink funnel, filter and bucket) . the maintenance kit is at 68% right now. As for the test print, here are the picutes. One this I just remember, I know something fell off the...

Just made a test, and nothing changed.

I've just took off the two cyan printhead to interchange them. When I've oppened the main door, I've saw small part that was looking like a small rock of ink (around 2mm X 2mm) near the carriage. I've also cleaned the printhead connector and look if there was any debrit. Now the printer is...

if it help, I've printed this at 10pass.

sure

I've forgot to mention, if I print a cyan, magenta, yellow and black square (12inX12in), everyting is fine.

So, I have a HP L26500 and I have horizontal banding in blue color only. I normally have this problem in black color, but now it's fine. I've changed both cyan printhead tried different material and profile and I still have the problem. I have printed the ''test'' print and everything is fine. I...

same questions here.

Is it compatible with older printer like the L26500?

If you ever found a place that do it that cheap, let me know. It could be a good information.

If you go on the airmark website, you will find the pricing. Vinyl Cutters | Vinyl Plotters | Contour Cutters | SummaCut Series

So I was contacted by Caldera and offer their option webshop to sell my products online. I have to say that it's very interesting but also pricey. I was wondering if there was other option similar to this.

to install floor graphics, I use my aluminum BS with the telescopic pole. One person at the end hold the vinyl and I just push the squeegee/material down. Since I'm stepping on the first half, nothing move. No one have to bend over or been on their knees for a long period of time and it take no...

I have a 30ft usb cable with a booster in it for my D160. I wish I had the ethernet port, but de D series do not have it. As for the hub, I can't answer because I've never tried it, but theoretically, it should work.

I agreed. I always test the paint first and wait a minimum of 30 days for the paint to outgass before installing a mural. I use around 10 rolls of phototex per month and never had a problem. If the customer say the phototex is too expensive, I go with those material and never had a problem...

Great, thank you. I will try that. On another note, after talking with my dealer who talk with gerber about the problem with the 3M film, it seems it's the material itself that is the problem. I will get a new roll tomorrow and make some test. I've also ask pricing for the fluo foils and one...