Search results

I agree on the digital printing. It's not a great way to go. Usually it has to be double-struck or printed front and back. Even then, lighter colors tend to wash out.

I'd recommend Phillip (Neato) as well.

You can either just apply vinyl to the flex or have the faces printed. Eradication is an option, but not "the norm". Keep in mind the face should be cut approximately 12" larger (HxW) than the face side of the sign to account for the material that will be attached to the framing. In other...

I've ran into the same problem. A small bottle jack and a piece of lumber cut to length makes for a nice spreader. It will allow you to get the lamps replaced without having to jar the sign by beating on it (no offense jtrube).

MDO stretcher...

That looks great - nice work!

Just depends on how exactly they were installed: If they're just stud-mounted in E.I.F.S., then a stiff putty knife works well. If they're stud-mounted and there's silicone on the backs of the letters, which I assume there probably is, a combination of a thin, narrow, sharp putty knife and a...

Don't be jealous...

Who are you using currently?

Yep, it's braille...and pretty good chance the landlord won't have a clue who made them.

I'm not a designer - but wouldn't the drone be better placed as a substitute for the "O" in the word "DRONE". It just seems like you would want the object over the word it's representing. "PRO" is such a short word, it seems like it would also be less distracting/cluttered if the drone were...

Watchfire...

Are you referring to a sign that is internally illuminated with LED's or are you referring to an EMB/EMC? Not sure if you're wanting a supplier for LED's or for a cabinet of some sort....

I've had similar results from actual oil change facilities. I decided long ago that oil changes are too important to entrust to someone that likely couldn't care less about my vehicle. I buy Mobil1 at Costco and do everything myself.

I have this compressor with this spray gun. It's for home use, but works decently. The gun is actually really nice for the price but you would do better getting a little larger compressor. I just got through spraying about 250' of base trim and nine doors and the gun performed flawlessly. I...

Was that at North Star?

That's who I was going to recommend - Speed Inc. or Straightline. Should be fun!

Cool, who's doing the tuning?

Break the rear yet? :covereyes:

VHB...that's all that would be required and what is typically used for signs like that.