Search results

The DC5 isn't very different to the DC4, so they should not have any problems with supporting you about the basic features, IF they experienced with the DC-Printers at all. And they should if they sell the machines. You will install the colour palettes together with the Summa Printer Tools...

Regularly you don't have 4 different blues, but a colour deviation from left to right. Assembling this kind of prints will lead to the impression that every tile have a different colour, because they don't match on every side of the print. This problem isn't only latex. So the RIP-manufacturers...

Could be the pinch rollers anyway. Or do you work with reduced pressure on the pinch rollers? Be shure to lower the middle pinch rollers too. Have a look on the back of your media after tracking. You should see the tracks left by the grit rollers. Compare it with the picture attached to this...

You shurely mean "linearization can not be done on the RIP's end"? Because the latex 360 is a contone printer, linearizing in the RIP doesn't make any sense.

Doing the linearisation in the RIP doesn't make any sense, because it won't be applied. To adjust the density, the dithering needs to be varied ... but in a contone printer, the dithering will be created by the printer itself. The only thing what makes sense to do it outside of the printer is...

This thinking is very dangerous. My suggestion is: stay open minded. I'm a supporter in the business for nearly 20 years. You can be shure that "I know how to do this" is one of the more often causes for problems.

The FlexiPRINT Basic Edition delivered with that printers is a basic software. OF COURSE, as soon as buying a commercial product (as can be done too with a higher version of FlexiPRINT) could lead to more satisfaction. Me, as a supporter, have deeper experiences with several RIP-Products. I...

The disc space the RIP needs do not depend on the size of the source file. Every image will be converted to a halftone "bitmap" in 1:1 scale, and a large format print, additionally printed in high resolution, could need gigs of hard disk space. In addition, because of that, a 1'440x720dpi print...

If wanting best colour out of your latex, you have to do calibrations. For example, I mostly switch off the synchronizing of the current media. Regularly, as soon as loading media to the printer, the RIP-Software reports the media type (and asks for confirmation for applying the suitable...

If the pint don't slide out, regularly this is because of one of the washers on the left or right side of the roller is fallen into the c-clips groove. Push it up with something, and the pint will slide. If you plan to replace the outer pinch roller with one of the intermediate ones: they are...

What is the problem with the FlexiPRINT RIP? For me, it have currently one of the best drivers and functionality for that printers. But, to be honest, I too change some default settings to let that software working smooth. And sometimes the new technology of the printers is confusing: blaming...

They are Summa OEM: You will find the suitable Summa Manuals here: User Manuals | Summa

You can set this settings in the profile you use. So you don't need to do it everytime when starting a print. When I want to test settings, i clone the profile in the library and modify it.

could it be that you have switched off colour management? "blue to purple" sounds a little bit like that. But you will never have best color quality without specific profiles.

VersaCamms need to start loading manually when in Service Mode. If you have media loaded, raise the sheet loading lever and lower it again.

You're welcome.

FlexCut can be activated by the software, and in the cutter itself. If your software (you doesn't mention which one you use) do not have a setting for flexcut on regular contours, you could try to activate Flexcut Plotter based. It still could happen that your software oversteer this setting...

Have a look into the ink bay. Below the light ink tanks, you will find the connector of the power supply of the vacuum pump, and a little screw. This screw is the vacuum regulator adjustment screw. Turning the screw clockwise will increase the vacuum, turning it counterclockwise will reduce it...

You can use Summa Drivers, this Gerber Plotters are Summa OEM. Find some e. g. on www.summausa.com .

We use i1 and Barbieri devices (Spectropad and Spectro LFP) with Flexi.