Search results

We can all understand that you have extensive experience with solvents, but someone with little or no knowledge of solvents can do serious damage very quickly with some some of your mixes. This is a forum where everone can express their views, that does not mean that those views go on...

Print the internal color palette

You need to do Head Slant, Head Tilt and Uni and Bi Directional adjustments in Maintenance Mode. You will need a Service Manual or a Service Tech.

Here you go! ftp://ftp.mutoh.com/MSDS%20Sheets/

Well here are the print speeds for the 1614 64" http://www.mutoh.com/products/ValueJet/1614_Print_Speeds.html And the for the 1618 64" http://www.mutoh.com/pdf/ValueJet/VJ-1618%20Speed%20Chart.pdf

Any Mutoh dealer http://www.mutoh.com/webmap/locationmap.html

Make sure you use a non-stretch material, we use polyester. You can do this for the feed AND take up and ANY rollers in the system. You will have to do a process of elimination.

Cost... $100-400 per profile x every machine on the market x every RIP on the market x every ink set on the market... Adds up quickly...

Here is how to do the alignment. ftp://ftp.mutoh.com/Printer%20Information_Manuals/Falcon%20II%20Outdoor/Manuals/ ProWraps is correct, most issues are loading. I cut both corners off the media and tape to the triangle and pull on this tape to wrap it on the take up. But you can...

http://www.mutoh.com/products/ValueJet/ValueJet1304-54.html The 1304 is a wider 1204. The error is a main board error. About the only option you have is to insure that you have good clean power going to the printer.

What does your nozzle check look like?

Good luck, it probably just need alignment.

PM sent

What does your nozzle check look like? Have you redone the PF Adjust?

IF you lay it where there is a loose fiber (and there are many in paper towels) and it goes into a nozzle, you can have issues. MEK is a MUCH more aggresive solvent and can damage circuit parts on the head IF used improperly. It will also damage the seal around the cap, if you try to use it...

NEVER paper towels.... (paper fibers) You should use a non-shedding clean room cloth, and there is almost never a reason to remove the head (if you do, you will need to redo ALL the head alignments. Wet a non-shedding clean room cloth, release and move the head, place the wet cloth on the...

I had a Rolex from China, it was only $35.

Yes, without a fuse protecting you, you are probably in line for a mainboard. Sure outdoor main boards are available. They should be available through your local Mutoh dealer. http://www.mutoh.com/dealer-locations/canada/Canada.html

So, are you up and running? If so, what was the problem?

That smell usually means stronger solvents. That usually means that they will dry faster on the head, capping station and in the drain lines requiring more maintenance than normally specified for the printer to avoid issues. The color gamut is typically different as well, usually meaning you...