Search results

Send me the specs. I can direct print, and cut them too, and give you a complete product, or just cut the poly and you can put the graphics on.

Best way, sharp onsrud or belin 2 flute upcut, very wet, 30 ipm feed, slow plunge so the tip of the bit does not gum up right away, 18k rpm. It's not fun but it works. Adding bridges on alum helps. Did I mention I too like routing alum the least-esp painted. 5052 routs like a charm, 3003 not so...

Actually, I had good success calling my distributor and having them get me a new profiler. I weighed a new box, took a pic, weighed the other box, and took a picture. I bought a lot from them so they may have wanted to keep me happy. Squeaky wheel. Of course HP could argue they "overfilled" the...

ok, this "sounds" silly, but any chance that cat 5 cable in the wall runs right up against a power line? 110, 220, whatever. There's a very good chance it wont work properly. You may get a link light, but not proper data transmission. Wanna guess how I know? Just a thought trying to help. You...

I like this thread. From experience doing just the same thing, the only way you will know the real cost is to tear at it and start working it. Very minimum you should expect to replace the pump tubes-$35 ea, easy to do and the primers-again, $30 something each. The rest you can probably clean...

Thanks for the props, those letters were a ton of fun to make and we're totally enjoyable. I'm so stoked they make a great portfolio piece for you. They would of course be a no brainer with today's full 3-d technology, but 12 years ago it was a different story!

Nice Work!!!! Those discovery letters are ESPECIALLY nice...and especially before full 3-d software!!!!! Good to see ya here!

Greg, you got ink to the dampers, so the problem is past that. Now, you need to see if it's the heads or the caps, or the cap station plumbing or the cap station pump (sometimes called the primer). On our HP's we d/c the line from the cap to the cap pump. Then hook that from the cap to to a...

Try mcmaster.com, or digikey -Rick

We have made hundreds of thousands of flat ones out of PVC and polystyrene. Can't help with the formed ones, though.

Methinks you need to find another wholesaler for your coros. Like us (weprintyouprofit.com), merritt, or wyld. I can say with 200% certainty that 4over barely ever fixes their own mistakes (like this) or a customers. Us smaller, independent shops will. We answer the phone, we fix problems, our...

Dup post, arrgh

Maybe it's because I buy A LOT of ink but Nazdar has always been awesome with us. Now, my comments are specifically about the bulk ink in jugs. They stock all my stuff at the local branch(about an hour from us) and have put backstock on our floor. Only one issue with a bad batch was resolved at...

We have printed a few for clients. It involves lens material, software, and printing. The lens and printing are fine here, the material is from Pacur. The images are the trick. Pshop can do it, and some people have custom scripts. Last time I ordered lens the largest I could get was 42 x 42 FYI...

before you all think you have it cheap-those of us with grand format machines are routinely over 1300 a month. Thats low, actually. 1900 is typical. And, we turn off servers and computers at night and weekends. That alone saves about a 100 a month-we have tracked it a few times. Big machines =...

Who cares what the logo looks like, we'll all be busy changing it out!

I'm in NJ but do a lot of these. If you email me specs I can get you a quote on production and shipping. +1 to monster though, too rick@typestries.com thx Rick

I'm not knocking harbor for doing it-I know they have a "sell to anyone mentality," and they have many products others don't, but to offer fabrication type work as well, and to feature it on the front page of their site seems like an odd choice. How many of us produce museum and exhibit...

Thanks guys and gals! I know some of you will curse me, but to go through all of this for 10-12 people just wouldnt work. By smaller, I meant more like 20. If I've messed up schedules, eg like Gino I apologize, but planning this has messed up a whole lot of schedules for me and the folks that...

OK Folks, after a sleepless night and an early morning, I have decided the best thing to do is seek another date for the event. I truly appreciate the offers to help, etc, but what really makes an event like this is getting all of you folks here to enjoy it! So use this thread to discuss...