Search results

It must be a sign!

Catchy title right? So for the passed month or so my machine barely prints yellow. Sometimes it doesn't spray yellow at all. After I do a heavy clean it sprays 60% and then after another cleans it gets better and only after the third heavy clean does it spray properly. Is this a sign that the...

We'll I basically capture the data on a weekly basis from all my machines. It allows me to see the performance and weekly usage of the machine based on how many meters we print and how much ink consumed and potentially what profit we should make on average per month.

I usually capture my weekly printed usage in an excel sheet (square metres printed and ink used) and get the data from my VersaWorks job log. The Versaworks job log though isn't always clear to read as it logs (New Job, Print End, Print Cancelled, RIP'd etc..). I assume that the only line to...

Thanks for the advice... Yes, its actually a rivet. Any videos out there that I can watch?

What is the correct method of placing a vinyl over a screw? I tried a heat gun but still doesn't look very best. I also tried cutting with a Stanley knife around the screw but also doesn't come out too next. Is there any specific method or technique or tool to be used?

What kind of vinyl is used as cut out wall vinyls? See image in link

Thanks guys. The problem was that I was not positioning the media correctly to get the most out of the material. I've played around with the configuration a bit and im getting the last few mm in :)

I would like to move over to the NuTec inks as it is cheaper and apparently it has the same make up as the Ecosol inks. The supplier has asked me to check on the roland software which parts may be due for replacement before using the nuTec ink. How do I check the lifespan of the parts?

I usually use the cutting blade to cut out vinyls so that its easy to remove and apply. I was wondering can I use the same blade to cut poster paper and save us the hassle of cutting the posters?

When printing on a sheet thats 1250 wide my machine says the media is only 1140 wide. How can I rectify this or work around it because when im printing an A2 I cant place one next to the other and end up wasting material