Search results

I cleaned both the printhead and the printhead connection. I still am not able to get a clean print with light cyan.

I am getting the error 98:03, "Potential print-quality problem. Check printheads using the printhead status plot". I took the ink out and shook the printhead. I was able to see both magenta and cyan coming out. I did a drop detection test and it says the light cyan is 1056.

Hi, how do I clean the printhead connection? Are you referring to the area that has the gold pins where the printhead sits into?

Hello, I am having a print quality issue. I did a force drop detection and I am not getting ink from Light Magenta and Light Cyan. I have replaced the printhead and still getting an error. Both printheads look good to me. Is there anything I can do before I need an HP service rep? My printer is...

Can this thread be deleted?

Thanks Glavin_ID, I believe this could be the same issue we had for our printer. I turned off the printer, unplugged the machine and plugged it back in. One thing I did not know is that the plug has to turn to the right after it is in the socket. The machine worked again after we turned the...

If anyone finds this post, the black ink was the problem. I refilled the line with new black ink 3 times and was able to get a fine prime bar test.

Hello, when I try to print something, I get an error for the UV Lamps, but this error does not show up with an error message. On the home screen, it just says "Error" on the right side. The lamps are at about 650 hours and I am waiting for new bulbs to be mailed to me. Potentially related...

Hi, my HP FB750 printer has mostly not been used for the past year and now will not print black ink at all. What I did during the past year - Clean the print heads, about every ~4 weeks due to COVID. - Kept the printer on - Made sure there was ink for each color What I tried - Check jet health...

I plan on cutting out several copies of letters to later rent out for events. I will most likely stick to a Sans Serif font. Like you said, if the font does have a curved bottom, I would have to flatten it out. Thanks for the font recommendations!

I do not need a font to have a flat bottom but it could. The poster above mentioned "Refrigerator Deluxe" which is a great font that already has a flat bottom. I noticed TED Talks letters generally had a flat cut for curved letters, so I plan to do something similar if needed.

I am planning on cutting out 3D letters for letters to stand on a stage. I am seeking out suggestions for a font that would work well for standing. I was thinking about using the Bold or Black version of the following fonts. - Gotham - Avenir Next LT Pro - Proxima Nova - P22 Underground -...

A client of mine is asking to print some text that matches their existing logo cling. The current vinyl is installed on the inside of the restaurant window. Question - Any idea what material was used in the attached image? - I currently use vinyl like 3M 40C. How would I print a frosted texture...

I currently have the printers on standby but I am wondering if I can completely turn off the printers.

Hello, based on the current world-wide pandemic, we may have to shut down our print shop for a long period of time. I am wondering if I can unplug the following printers. - HP FB750 - HP 560 - HP 260 Will anything bad happen to the printers if I leave them unplug? I am OK with the ink going...

This sounds like a good method.

Hi, I am wondering how I can get measurements for an escalator cling. I am mainly concerned how to get the measurement for the curved part at the top and the bottom. What methods can I use to get accurate measurements for curved areas?

Hi, so I think the belt for my HP 260 is broken, it keeps making a loud noise when moving and if I try to print, then the printer will say substrate jam even though there is no substrate jam. My printer is out of warranty, does anyone know anyone that fixes this in the Chicagoland area or is...

Hi, I am wondering if it is normal to see the print passes on the graphic when printing from an HP 750. I am currently printing using Indoor Signage in Caldera. I see a slight overlap between each pass. This is mainly noticeable when printing solid colors. It doesn't matter what substrate I am...

I have recently purchased the XRite i1 Pro 3. I am trying to create a profile and I did not see the device when starting the wizard. Can I use the XRite i1 Pro 3 with Caldera 11.2?