Search results

i am needing to hang 4 banners two per pole that are 24"x4' they are going on square poles. i ordered the metal industry's ones from fellers only to find out you have to special order brackets for the square poles. Thanks!

good to know thanks rfulford!

do a print cut adjustment, could also be the encoder strip be careful when cleaning to not damage it. make sure you do a environment match every time you use your printer also. there could be a lot of things causing this.. give us more information.

grimco is having a sale on this IJ170c for $400.00 for a 54" roll. what are the main differences between this film and the 180c? can you still use the 8518 laminate? the only difference i have read so far is just that you have to use heat to remove it? Thanks!

OK so i figured out the problem, the machine i was sold was damaged from the previous owner. it has a "lump" in the rounded metal front which was causing the media to lift about 2-3mil on one side of the printer which was causing the overlap on the media comp. thanks for all the reply's

your saying that the media comp having a overlap on one side and having a gap on the other side is not due to the media being loaded crooked? any ideas what this is from them? i don't understand how you set the media comp correctly when it is not constant though out width of material? Thanks!

im using a jv3-160s i am having issues with the media comp having a gap on one side and a overlap on the other. this means the roll is not loaded in straight correct? how do you guys get the rolls loaded in straight? is this a common problem? i am having issues with 180c 60" roll Thanks! Spencer

looks good, clean bright designs

Thanks! im using this profile on a sp-300v, i turned the cut speed down to 10. cuts and prints GREAT! the edges don't fray at all..

cs5! cant wait!

i have also noticed control tac does not like a lot of ink, or you get bleeding in the dark colors. i just had to tweak my the max ink on my profile tell i got a good rich black.

what is the bs? the big squeegee? what version are you using? i like the First revision a lot better than the new cradle version.

here are pictures of the process i used, if i was to-do it again i would of put the blue tape closer to the edges of the emblem.

i did it without removing the emblem turned out pretty well, i will post pictures of the process

I am only charging a 2 hour install for the tail gate so that alone makes me say the it isnt worth my time. i am going to lay that rubbery blue tape down wrap over it and cut on the tape so i dont cut the paint lift remove the tape then lay and hope for the best. unless there are any other...

has anyone removed on of these before? how hard is it? this is a NICE pickup i would not want to break any clips or scratch any paint, please advise.

tailgate wrap on 2007 ford super duty pickup i have read online that the ford emblems on the tailgate are very hard to get off and have small clips that can break easily? i would prefer to leave it on, however if i do this how do i cut it out with out is showing white around it? lay tape...

what inks do you guys use? anyone using triangle jvs ink? I would really enjoy some profiles if you had them.

i just bought 10 of 36mm magnets and 10 of the rubber covers total was $65.00 shipped usps. the rob ivers ones from fellers are $104.00 for 10. Thanks prowraps!

which size? they have 16mm - 75mm sizes. Thanks!