Search results

I have a Roland SP540V and trying to print this image on Orajet 3551 and the grays are printing with a greenish tint. Does anyone know a trick to print a true gray image without a green tint? Thanks

Making a 4'x8' single-sided outdoor sign using 6mm MaxMetal and applying a digitally printed full-size laminated graphic to the front side. How do you finish (treat) the outer edges to prevent the applied digital print from peeling from the edge over time? Thanks for any suggestions or help.

Have you actually tried to fill the cuts is a Silicone roller with a polyurethane Marine Sealant?

The trip to the ER is going to cost much more than renting the proper scaffolding equipment.....

When you say "You can lighten up the percentage", is that in the RIP or in Illustrator or Corel?

What is the average going price for a 3' x 8' full-color full-bleed digitally printed 13oz banner, hemmed with grommets? Artwork to be furnished. Thanks for any insight.

I use a Hot Knife to cut a clean edge on fabric like that so it does not unravel. I use a long aluminum ruler with cork applied to the bottom to hold the fabric from moving, however, I have noticed the aluminum ruler tends to draw the heat away from the cutting blade of the hot knife so I have...

Amazon: https://www.amazon.com/BR120-BRUSHED-ALUMINUM-Application-Vehicle/dp/B078X3P7FT?th=1

When shipping long rolls of cut vinyl, is it better to roll with the application tape on the outside or inside? I have not shipped any cut vinyl with application tape installed for a very long time, however, I remember the application tape bubbled up pretty bad. What is the best way to roll it...

What if they ask you for a copy of the full-size artwork to take to another shop to use for additional signage, T-shirts, or used on a partial vehicle wrap, do you just give them the file or do you charge them some kind of release fee? Thanks

Got a question about the design fee, lest say you create a custom multi-color window graphic (30" x 36") design in Photoshop (lots of 3-D effects and textures) and it takes several hours to create and you only charge the customer $50 design fee for the one sign. What if they ask you for a copy...

Does anyone know this font? Thanks

After changing my CYAN damper I am not getting any CYAN to print. I have checked the two print head fuses with a multimeter and they are both good, and I have been told because the BLACK is printing which shares the same fuse, is another indicator the fuse is good. I can draw CYAN ink from the...

Does anyone have the 2019 or 2020 Pro Vehicle Outlines? I went to their website to download the individual 2019 Jeep Wrangler JLU template and it was not available, so I wanted to know if you have a 2019 or 2020 CD version do they include the 2019 or 2020 Jeep Wrangler on the CD before I...

Does Anyone know this font? Thanks

Does anyone know what font this is? Thanks in advance.

Thanks, for the video, looks easy enough, however, I noticed in the start of the video when the power is disconnected the print head is over the capping station, and they at the end of the video when disconnecting the right side of the encoder strip the printhead is moved over to the left to...

How hard is it to align a new encoder strip? After install, do you have to do any adjustments to the printer? Thanks for any help, this will be my first time to replace the encoder strip.

I see that the encoder strip has a spring on the left side, how hard is it to replace, meaning do you have to align it in the EXACT position when installing a new one? Are there any alignment procedures to do after replacement? Do you know of any videos showing the procedure? Thanks

I have an older i1 and have been using it for many years, mainly us it to calibrate my dual monitors monthly, works great. The Roland tech used it to set up my printer 10 years ago.