Search results

Def check the rollers. With the laminated vinyl it may be just thick enough on loose pinch rollers to keep it from slipping and without the lam it may be loose enough to slip. When the media is locked try giving the media a tug in the front and see if you can pull the vinyl forward. You...

Glad you guys are happy with it. I've been talking with guys from Roland at the TyrrellTech show in MD and you'll have no issues with the switch man. We've got you covered!

I agree with Pacific Coast Sign. If you haven't done this type of work on your equipment before, why chance it. Saving yourself a $1000 now can mean spending $2000 later. Why take the chance?

Just out of curiousity, have you experienced this with more than one manufacturer? If you don't want to disclose the info publically, shoot me a PM, I'd love to know which brand you're having issues with?

If you are looking for solid quality prints with a decent speed the VP-540 does exactly what you are looking to accomplish. I would, however, follow the suggestions above and make sure you have gotten yourself up to date on the Intelligent Pass Control. This should kick it into a higher gear...

What machine are you using? Wouldn't hurt to do an Enviormental Match and check the Linear Encoder Strip while you're at it...

I haven't gotten that far into it to check out the circulation system in detail. I can tell you that just about every morning when I turn it on, the VS will tell me to shake the white and metallic ink cartridges

Here's an additional tip when cleaning it. Some people wipe the heads down using the swabs when they are wet. I've suggested that once they are done cleaning them wet, they should go back and wipe them down with a dry swab too and get the remaining solution off. You may also want to consider...

Not a problem. PM me if you have any problems or email me..DRamm@tyrrelltech.com

Thats what I was wondering too. Can you clarify?

Using the Contour Cut feature as opposed to the "pink lines" is always easier. You may also want to try exporting is an EPS rather than using the "send to versaworks" feature. Also make sure your Queue A & B Settings under Format has the EPS margin @ .01. This will avoid any clipping of the...

Agreed, Lot of customers like the fact that you can print in reverse with the white behind the color as well as the color over the white. You have options.

Yeah wait..that's right...The V works with Versaworks just fine..Who did you talk to at Roland?

TyrrellTech will be getting some samples in shortly. Once I have a chance to play around with it, I'll post some results..

I have a cutomer who cuts custom graphics for walls and museums. Prints and Cuts using the XC-540. He has 20 feet. Of course it's an issue with room behind the machine and in front, but he slows the speed down and takes his time and never had an issue.

I have been moving a fair amount of the VS-640's and FINALLY got one on my showroom floor to play around with it. Overall I do like the result of the Metallic Inks. Of the ones we sold, only two were setup to use the Metallic and White. It seems the biggest draw to this in my area is the DUAL...

If it's a case of the machine being too old, it may be a long shot but you may want to upgrade the firmware on the machine. This may or may not help. I've had issues with customers who shared similar problems. Most started with an older version of Versaworks and did many updates. I had...

I have seen guys use the sandpaper method and turning the lights off for a simple solution. It does work. The glossier laminates especially from Oracal tend to have this type of result. I have even seen customers use an olfa knife and cut squares around the circle where the registration marks...

Are you getting jagged edges along the sides only? Or throughout the entire cut? The FC8000 was made for this type of work, so there must be some adjustments made on your end. The settings that CGSigns provided are exactly what I would use. Did you give that a try?

A few things here... -Do you leave the main power of the machine on at all times? The machine has a self cleaning mode and if the main power is off, it could result in clogging up. -If you aren't getting any color in the test prints at all, I would recommend running a few medium and manual...