Search results

most light up signs are either wired to a switch or timer. turning off the power should not have been an issue. guess the big question here is did you ask or where told that the power would be off prior to removal? if there truly was no way to turn off the power. I would have charged a hazard fee.

we still accept card for anything under $100. anything above that has to be cash/check

i dont suppose there is any way to narrow it down to what cartridge?

I got an ink cartridge error on all 11 cartridges. if pull out 1 cartridge all other inks show up fine. it doesn't matter what ink i pull out to make it do this either. any ideas on what could be going on here?

never had a cover for my printer. but just a word of advice make sure its a material that will not cause static!

methylene Chloride Solvent is "melt" away the wrap. its got a high price tag imo not to mention it will burn your skin if your not careful

try putting a piece of blue tape over the rear sensor. its not a fix but it might get you though the day. we had to do that a few times on specific material..

interested in the Arlon DPF6000XRP 54" and the 3220 54" PM me when you get a chance!

guess the big question is why switch if you dont need to.. we have the VG540 CMYKx2 for a little over a year now and have had 3 service calls due to sensors in the dampers. other than that we really like the VG. maintenance is easy. it does anything we ask it to. some will say it consumes...

shutterstock is fine. image club has a good collection as well. the reps can be a pain at times.

Im looking for a template for a 2002 FL70 Freightliner. please let me know if you have one or know where i can purchase one. Thanks!

I would be willing to sell B2B screen printed apparel. let me know if your interested. vinyl@highvelocitygraphics.com 719-849-1473

lol isnt that the way it always seems to go

IMO - they accepted the signs, used them for there full event, therefor they have to pay. if there was a noticeable issue with the prints at the time they accepted them or while they where setting them up that would have been the time to complain about them not after the event is over. on my...

Gin ?

sorry about that, yes im referring to the ink waves around the captops.ill check on how they seat here shortly Thanks

Hello everyone, Im looking for ideas on what would cause the captop area to begin looking like the photo. this machine gets cleaned manually every Monday. the area around the captops used to be just slightly dirty with a mist of ink on occasion but it seems to have gotten alot worse the last 2...

with the way screen printing is It shouldn't matter especially for a single color print. just make sure to let the printers know it needs to be black print and all should be good.

Any ideas on the Stone Ridge font?

im going to assume you want to know the time to wait before laminating. in a rush i wait about 20 min. however most the time i try to at least wait a day, especially on prints with heavy ink.