Search results

Try feeding the material out on to the heater for a couple minutes then feed it back in. That happens to us when the vinyl is still cold and the machine starts warming up.

We just shipped some decals to Norway last week.:thumb:

Hope this helps!

Gene, You may be able to go into the properties of you new mouse and set it to do those commands with the wheel. I am not familiar with your mouse or software. Its funny how differently the scroll wheel works between different programs.

Up/down should be scroll wheel only. Left/right should be shift+scroll wheel. Zoom should be Ctrl+scroll wheel. Thats how my flexi 8.6 works.

What I do is send both jobs at the same time using the send as separate jobs box in the lower left of the pic I posted. When I send I usually have it hold rather than send now. Then it will add 2 jobs to the product manager the first is the print and has a .fjb the second is the cut and has .job...

here's where the contour cut is when using rip/print

Flexi 8 can do every thing you said it can't. Just take a couple minutes to get familiar with the product manager and you will start to like.

Save it as a psd file and it will be transparent in flexi.

Another vote for the Australian built Applikator 2R !!!!!!!!!!!!!!

Yes that is the cable I use. Got it at office max about $25 Yes worked with the Flexi version 7 and 8.1 and also 8.6

We use an old pnc-950 daily with Flexi and windows xp. Your problem is probably with the parallel port LPT. Get a USB to LPT cable then in your production manager in flexi assign the pnc-1000 to the usb printer port. I have never tried to use it with autocad or corel. Hope this helps

I actually reloaded version 1428. I will try updating to 1472 and see what happens. I kinda liked the contour cut updates in 1465 but copy and pasting a high res pic took sometimes 10minutes.. but if I used step and repeat it would copy quickly. Thanks for the help!:rock-n-roll:

The production manager in 8.1 doesn't support our VP540. I would have to save everything as an eps then inport into Versaworks to print. I find it to be less work to print directly from Flexi whenever possible. Also saves room on my hard drive.

8.6 Doesn't seem as stable as 8.1, I have some files I cannot open in 8.6 that open fine in 8.1. The thing is I need 8.6 for my VP540 and really like the updated product manager in 8.6. I run XP64

Our VP-540 purchased 2 years ago came with the long media clamps.

Try one. We have done them like that but you may notice some banding. Depends on how picky your customer is.

If you have only a 4 color machine ..... how can it print white?

You need to connect it via a network cable (cat5e). Either to the network connection on the laptop or to a router. Then input the IP address when adding the printer in flexi.

Here's what I use, Roland VP540, Flexi 8.6, Arlon 4560gtx profile. RGB R=167 G=25 B=48 Matches Avery Fire Red