Search results

Change your Cap Tops ($25 each and Replace BOTH)- then do a Medium Cleaning Problem solved. Cheers

Set your Versaworks to update automatically, all the profiles will be updated as well as any new versins of VersaWorks. Go to EDIT Preferences Change UNIT to Inches Click on the Roland@Net tab Check the Check for Updates Automatically and Notify UN-CHECK Update All Languages Check For the...

Roland increased the EcoSol Ink prices as of January 1st - 220ml = $69.99 440ml = $128.99.

Be VERY careful to pull the Damper straight up so you do not break the nipple(s) on the damper. If you do, the new manifold is about $40. Be sure to get the proper damper that FITS the nipples correctly - contact your local Roland Dealer, best to get the correct part and reduce problems down the...

Best to use Roland's "new style" 3 pump system (with kit). These are very durable and lasting a very long time compared to the older style. Well worth the change over.

From your local Roland Dealer - part # 1000001658 Price $6.00 More durable for sure

Use Glossy Calendered Vinyl profile - Works!

Check on the Roland site for the latest Firmware and upgrade (if needed), I do not know what firmware you currently have. An upgrade may give you a new ink type, if not choose solvent. Which Pro II do you have?

If it's too cold the printer won't turn on.

Be sure to READ the install instructions - the screws fit for each side and if you get them mixed it's a tough way to install. The take-up is great, be sure to get the media loaded straight (Pull the center of the media to align, then lower the wheels). We have customers printing banners and...

Flush the lines Lock the heads in place Box correctly Insure for the FULL amount of the printer with shipper Cheers!

Are you using the old Clear Wiper Scraper or the newer Black Wiper Scraper (stiffer and lasts longer - about $6 ea)

Call your local Roland Dealer for a list of Reconditioned XC540's in Roland's stock (if available). The Reconditioned Printers will come with a Roland warranty and be sure to register when you get the printer. We sell used Rolands, but the XC's do not last very long on the showroom floor, if you...

It's not the heat, banners do not get hot enough to wrinkle while printing and once it reaches the drier heater it's beyond the print heads. How many pinch rollers are you using? Look at the two outside pinch rollers, most likely you have flat spots (created by leaving the wheels in the down...

Put the new head in... less issues, less trouble, plain and simple.

As of January 1st the VP300i and VP540i will have a price increase, but still a better printer for the money.

The XC starts out at the cartridges with larger ink tubes, then (in a few feet) the tubes are reduced in size with a brass fitting...these fittings can become loose or o-rings wear out....just a place to check for air/ink leaks. Happy Holidays!

It should be set to EcoSol CMYKLcLm for 6 color. The solvent ink is hard on parts (including heads). Did you do a FULL flush of the entire system using first the "mild" solvent, then with flush with the EcoSol Solvent. Then, replace all dampers, cap stations, pads, wiper, and scrapers. And...

Great printers, 3" wide heads make for fast speeds and the upgrade to intelligent pass gives a better print. The solvent ink that is hard to clean and hard on parts is addressed well with the AJ 1000...easy to clean. Only issue is the solvent ink and fumes that must be exhausted...prints will...

This is based on pump times, cleanings, and print times. The pads are under the wipers...see the white thumb screw...pull out the tray and replace the pad (From Roland) if needed.